PUMP GP-CHARGE 2666912 - Caterpillar

Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Procedure for the Tractor
Illustration 1 g02151524
(1) Transmission drain plugs Transmission drain plugs (1) are located under the tractor.Note: Operate the machine until the transmission oil is warm.
Park the machine on a level surface. Engage the parking brake.
Lower the bowl to the ground. Stop the engine.
Clean the area around drain plugs (1).
Remove drain plugs (1). Drain the oil into a suitable container. Note: Clean the suction screen at this time. Refer to Operation and Maintenance Manual, "Suction Screen (Transmission Scavenge) - Clean" for the proper procedure.
Clean drain plugs (1). Install the drain plugs.
Illustration 2 g03080242
Clean the area around oil filler cap (2).