PUMP GP-GEAR 2678901 - Caterpillar

TARGET="_parent">Cooling System Coolant Level - Check
Engine Air Filter Service Indicator - Inspect
Engine Oil Level - Check
Fuel System Water Separator - Drain
Fuel Tank Water and Sediment - Drain
Hydraulic System Oil Level - Check
Indicators and Gauges - Test
Quick Coupler - Lubricate
Seat Belt - Inspect
Thumb - Lubricate
Track Adjustment - Inspect
Travel Alarm - Test
Undercarriage - Check
Every 10 Service Hours or Daily for Machines Used in Severe Applications
Blade Linkage - Lubricate
Bucket Linkage - Lubricate
Initial 50 Service Hours
Belts - Inspect/Adjust/Replace
Every 50 Service Hours or Weekly
Blade Linkage - Lubricate
Every 100 Service Hours or 2 Weeks
Bucket Linkage - Lubricate
Swing Gear - Lubricate
Every 100 Service Hours or 2 Weeks for Machines Used in Severe Applications
Boom and Stick Linkage - Lubricate
Initial 250 Service Hours
Engine Valve Lash - Check
Final Drive Oil - Change
Final Drive Oil - Change
Hydraulic System Oil Filter (Return) - Replace
Every 250 Service Hours
Engine Oil Sample - Obtain
Final Drive Oil Sample - Obtain
Final Drive Oil Sample - Obtain
Every 250 Service Hours or Monthly
Belts - Inspect/Adjust/Replace
Final Drive Oil Level - Check
Final Drive Oil Level - Check
Swing Bearing - Lubricate
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
Cooling System Coolant Sample (Level 2) - Obtain
Every 500 Service Hours
Blade Linkage - Lubricate
Boom and Stick Linkage - Lubricate
Boom, Stick, and Frame - Inspect
Cooling System Coolant Sample (Level 1) - Obtain
Hydraulic System Oil Sample - Obtain
Every 500 Service Hours or 3 Months
Engine Oil and Filter - Change
Fuel System Primary Filter (Water Separator) Element - Replace
Fuel Tank Cap and Strainer - Clean
Every 600 Service Hours of Continuous Hammer Use
Hydraulic System Oil - Change
Hydraulic System Oil Filter (Return) - Replace
Every 1000 Service Hours
Engine Valve Lash - Check
Every 1000 Service Hours or 6 Months
Battery - Clean
Battery Hold-Down - Tighten
Every 1000 Service Hours of Partial Hammer Use (50% of Service Hours)
Hydraulic System Oil - Change
Hydraulic System Oil Filter (Return) - Replace
Every 2000 Service Hours or 1 Year
Final Drive Oil - Change
Final Drive Oil - Change
Hydraulic System Oil Filter (Return) - Replace
Receiver Dryer (Refrigerant) - Replace
Swing Gear and Bearing - Inspect
Every Year
Cooling System Coolant Sample (Level 2) - Obtain
Engine Air Filter Secondary Element - Replace
Every 3000 Service Hours or 18 Months
Hydraulic System Oil - Change
Every 3 Years After Date of Installation or Every 5 Years After Date of Manufacture
Seat Belt - Replace
Every 6000 Service Hours or 3 Years
Cooling System Coolant Extender (ELC) - Add
Every 12 000 Service Hours or 6 Years
Cooling System Coolant (ELC) - Change