2690542 PUMP GP-PISTON Caterpillar parts
AP-600D, AP-655D
Rating:
Alternative (cross code) number:
CA2690542
269-0542
2690542
CA2690542
269-0542
2690542
Weight: 99 pounds 45 kg.
ASPHALT PAVER,
Number on catalog scheme:
2
For full view, you need register
Information:
Installation Procedure
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01378446
Install hydraulic oil cooler (9) and bolts (8) .
Connect hose assemblies (10) .
Illustration 2 g01378445
Connect hoses (7) .
Illustration 3 g01378444
Install bracket (6) and bolts (5) .
Illustration 4 g01378442
Position fuel cooler (3) and install mounting bolts (4) .
Illustration 5 g01378321
Install cover (1) and bolts (2) .
Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".
Fill the transmission. Refer to Operation and Maintenance Manual, "Transmission Oil - Change".End By: Install the aftercooler. Refer to Disassembly and Assembly, "Aftercooler - Remove and Install".
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01378446
Install hydraulic oil cooler (9) and bolts (8) .
Connect hose assemblies (10) .
Illustration 2 g01378445
Connect hoses (7) .
Illustration 3 g01378444
Install bracket (6) and bolts (5) .
Illustration 4 g01378442
Position fuel cooler (3) and install mounting bolts (4) .
Illustration 5 g01378321
Install cover (1) and bolts (2) .
Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".
Fill the transmission. Refer to Operation and Maintenance Manual, "Transmission Oil - Change".End By: Install the aftercooler. Refer to Disassembly and Assembly, "Aftercooler - Remove and Install".
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts pump Caterpillar catalog:
924H, 924HZ, 938H, 953D, 963D, AP-600D, AP-655D, BG600D, BG655D, C6.6, D6K, D6K LGP, D6N, IT38H, M316D, M318D, M318D MH, M322D, M322D MH, PL61, R1300G II
AP-600D, AP1000E, BG1000E, BG600D
1095164
PUMP-CHARGE
35, 45, 55, AP-1055D, AP-600D, AP-655D, AP-900B, AP1000E, AP555E, BG-260D, BG1000E, BG500E, BG600D, BG655D, PM-465, RM-300, RM-350B, SM-350
35, 45, 55, AP-1055D, AP-600D, AP-655D, AP-900B, AP1000E, AP555E, BG-260D, BG1000E, BG500E, BG600D, BG655D, PM-465, RM-300, RM-350B, SM-350
1088537
PUMP GP-GEROTOR
65C, 75C, 75D, 85C, 85D, AP-1055B, AP-655C, AP-655D, AP1055E, BG-2455C, BG-2455D, BG1055E, BG655D, C11, C13, C15, C18, C9, C9.3, CX31-C13I, CX31-C15I, CX31-C18I, CX31-C9I, CX35-C18I, CX35-P800, TH31-E...
65C, 75C, 75D, 85C, 85D, AP-1055B, AP-655C, AP-655D, AP1055E, BG-2455C, BG-2455D, BG1055E, BG655D, C11, C13, C15, C18, C9, C9.3, CX31-C13I, CX31-C15I, CX31-C18I, CX31-C9I, CX35-C18I, CX35-P800, TH31-E...
120M, 12M, 420E, 430E, 450E, 924H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, C4.4, C6.6, CB-54B, CP-56, CP-64, CP-76, CS-54, CS-54B, CS-64, CS-74, CW-34, D3K XL, D4K XL, D5K LGP, D6K, D6K LGP, D6N, I...
120M, 12M, 320D GC, 320D L, 323D L, 420E, 430E, 450E, 613G, 914G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP555E, BG500E, BG600D, BG655D, C4.4, C6.6, CB-54, CB-54B, CB-64, CP-44,...
120M, 12M, 420E, 430E, 450E, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP555E, BG600D, BG655D, C4.4, C6.6, CB-54B, CP-44, CP-56, CP-64, CP-76, CS-44, CS-54, CS-54B, CS-5...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 420E, 430E, 553C, 613G, 914G, 924H, 924HZ, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG500E, BG600D, BG655D, C4.4, C6.6, CB-54, CB-54B, CB...
120M, 12M, 2470C, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 525D, 535D, 545D, 553C, 559, 613G, 924H, 924HZ, 924K, 928H, 928HZ, 930K, 938H, 938K, 950 GC, 953D, 963D, AP-600D, AP-655D,...
1284120
PUMP GP-HAND
AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG1000E, BG1055E, BG500E, CB-634D, CP-433C, CP-433E, CP-44, CP-533E, CP-56, CP-573E, CP-64, CP-663E, CP-76, CS-423E, CS-431C, CS-433E, CS-44, CS-531C, CS-53...
AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG1000E, BG1055E, BG500E, CB-634D, CP-433C, CP-433E, CP-44, CP-533E, CP-56, CP-573E, CP-64, CP-663E, CP-76, CS-423E, CS-431C, CS-433E, CS-44, CS-531C, CS-53...
1126763
PUMP-CHARGE
AP-1055D, AP-600D, AP-655D, BG-260D, BG600D, BG655D, CS-323C, RR-250, SS-250
AP-1055D, AP-600D, AP-655D, BG-260D, BG600D, BG655D, CS-323C, RR-250, SS-250
2912605
PUMP GP-GEAR
AP-600D, AP-655D, BG600D, BG655D
AP-600D, AP-655D, BG600D, BG655D
7C1208
PUMP GP-WATER
AP-1200
AP-1200
2115015
PUMP GP-VACUUM
564, 574B
564, 574B
416, 426, 426B, 428, 428B, 436, 436B, 438, 438B, RT50
2703546
PUMP & MTG GP-AUXILIARY
AP-600D, AP-655D
AP-600D, AP-655D
3126, 3126B, 3126E, AP-755, C-9, C7, PM-102
4396393
PUMP AS-FUEL INJECTION
303E CR
303E CR
3567277
PUMP GP-FUEL INJECTION
CB-534D, CB-564D
CB-534D, CB-564D
1121172
PUMP GP-GEAR
933, 939
933, 939
2036808
PUMP GP-PISTON
TH210, TH215
TH210, TH215
2362048
PUMP & MTG GP-HYDRAULIC
TH210, TH215
TH210, TH215