2788376 PUMP GP-PISTON Caterpillar parts
CP-76
Rating:
Alternative (cross code) number:
CA2788376
278-8376
2788376
CA2788376
278-8376
2788376
Weight: 82 pounds 37 kg.
VIBRATORY COMPACTOR,
Compatible equipment models: 2788376:
Number on catalog scheme:
14
For full view, you need register
Information:
Park the machine on a hard, level surface. Engage the parking brake and chock the wheels. Turn the disconnect switch to the OFF position.
If necessary, raise the suspension and place wood blocks between the frame and the axle.
Illustration 1 g00562633
Remove two bolts (1), the washers, and the nuts that secure guard rail (2) to plate (3) .
Illustration 2 g00562634
Remove bolt (4) and the nut that secures guard rail (2) to fender (5). Remove the guard rail.
Illustration 3 g00562637
Install Tooling (A), appropriate nylon lifting straps, and a hoist to fender (5) .
Illustration 4 g00562635
The bolts in this photo are located above the tire inside the wheel well.
Remove three bolts (6) at the front of fender (5) .
Illustration 5 g00562636
Remove bolt (7), the washers, and the nut at the rear of fender (5) .
Illustration 6 g00562699
The bolts in this photo are located inside the wheel well.
Remove two bolts (8), the washers, and the nuts that secure fender (5) to the machine. Remove the fender. The weight of the fender is 66 kg (145 lb).Installation Procedure
Clean all parts and inspect all parts. If any parts are worn or damaged, use new Caterpillar parts for replacement.
Illustration 7 g00562637
Install Tooling (A), appropriate lifting straps, and a hoist. Place fender (5) into position. The weight of the fender is 66 kg (145 lb).
Illustration 8 g00562699
The bolts in this photo are located inside the wheel well.
Install two bolts (8), the washers, and the nuts that secure fender (5) to the machine.
Illustration 9 g00562636
Install bolt (7), the washers, and the nut at the rear of the fender.
Illustration 10 g00562635
The bolts in this photo are located above the tire inside the wheel well.
Install three bolts (6) at the front of fender (5) .
Illustration 11 g00562634
Place guard rail (2) into position. Install bolt (4) and the nut that secures guard rail (2) to fender (5).
Illustration 12 g00562633
Install two bolts (1), the washers, and the nuts that secure guard rail (2) to plate (3) .
If necessary, remove the wood blocks between the frame and the axle. Adjust the suspension. Refer to Operation and Maintenance Manual, SEBU7064, "Suspension - Lower" for the proper procedure.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts pump Caterpillar catalog:
2774262
PUMP GP-ENGINE OIL
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
3034083
PUMP GP-FUEL INJECTION
C6.6, CP-76
C6.6, CP-76
120M, 12M, 613G, 924H, 924HZ, 928H, 928HZ, 953D, 963D, AP-600D, AP-655D, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-64, CS-74, D6K, D6K LGP, D6N, M316D, M318D, M318D MH, M322D, M322D MH, PL6...
2957854
PUMP GP-PISTON
CP-76
CP-76
2790480
PUMP GP-GEAR
CP-54B, CP-56, CP-64, CP-76, CS-54B, CS-56, CS-64, CS-64B, CS-74
CP-54B, CP-56, CP-64, CP-76, CS-54B, CS-56, CS-64, CS-64B, CS-74
2600346
PUMP & MTG GP-STEERING
CP-56, CP-64, CP-76, CS-56, CS-64, CS-74
CP-56, CP-64, CP-76, CS-56, CS-64, CS-74
2957855
PUMP GP-PISTON
CP-76
CP-76
120M, 12M, 420E, 430E, 450E, 924H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, C4.4, C6.6, CB-54B, CP-56, CP-64, CP-76, CS-54, CS-54B, CS-64, CS-74, CW-34, D3K XL, D4K XL, D5K LGP, D6K, D6K LGP, D6N, I...
120M, 12M, 320D GC, 320D L, 323D L, 420E, 430E, 450E, 613G, 914G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP555E, BG500E, BG600D, BG655D, C4.4, C6.6, CB-54, CB-54B, CB-64, CP-44,...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 420E, 430E, 553C, 613G, 914G, 924H, 924HZ, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG500E, BG600D, BG655D, C4.4, C6.6, CB-54, CB-54B, CB...
120M, 12M, 2470C, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 525D, 535D, 545D, 553C, 559, 613G, 924H, 924HZ, 924K, 928H, 928HZ, 930K, 938H, 938K, 950 GC, 953D, 963D, AP-600D, AP-655D,...
3041618
PUMP GP-PISTON
CB-22
CB-22
2957855
PUMP GP-PISTON
CP-76
CP-76