PUMP GP-WATER 2808039 - Caterpillar

RPM 800 RPM Maximum engine speed at which the shift sequence will begin.
Max Engine Speed During Shift Min = 0
Max = Max Engine Speed to Shift - 50 RPM 750 RPM The maximum engine speed that the engines are held at during a shift.
Shift In Progress Hold Time 0.1 sec 25 sec 3 sec The amount of time that transmission gear pressure is greater than Transmission Engaged Pressure Limit before completing the shift
Wheel Drag Down Enable Maximum Engine Speed 550 RPM 2000 RPM 950 RPM WDD shift protection is enabled when the Engine Speed transmission is in gear and the engine speed is greater than Wheel Drag Down Enable.
Wheel Drag Down Enable Delay Time 0 sec 20 sec 4.0 sec WDD shift protection is enabled when the transmission is in-gear and the engine speed is greater than Wheel Drag Down Enable Maximum Engine Speed for a length of time greater than Wheel Drag Down Enable Delay Time.
Wheel Drag Down Disable Delay Time 0 sec 20 sec 4.0 sec The WDD check shall be disabled when the conditions for WDD are not met for Wheel Drag Down Disable Delay Time.
Wheel Drag Down Hold Minimum Engine Speed 550 RPM 1500 RPM 750 RPM During WDD the engine speed is ramped to this value to make the shift.
Wheel Drag Down Hold Time 0 sec 20 sec 3.2 sec The amount of time that the engine speed is held at the Wheel Drag Down Hold Minimum Engine Speed during a shift request.
Wheel Drag Down Exit Speed 550 RPM 2000 RPM 775 RPM Engine Speed to indicate WDD complete.
Wheel Drag Down Shift Out of Gear Time 0 sec 20 sec 1.0 sec The maximum amount of time that the PCP will wait before a shift out of gear occurs.
Wheel Drag Down Shift Into Gear Time 0 sec 20 sec 2.0 sec The maximum amount of time that the PCP will wait before a shift into a gear occurs.
Wheel Drag Down Shift to Neutral Time 0 sec 20 sec 1.0 sec The maximum time at which WDD is in Neutral.
Transmission Engaged Pressure Limit 0 kPa 4000 kPa (580 psi) 2413 kPa (350 psi) The transmission pressure limit that the PCP considers the shift to be complete.
Transmission Disengage Pressure Limit 0 kPa 4000 kPa (580 psi) 1378 kPa (200 psi) The minimum transmission pressure at which the transmission will become disengaged.
Transmission Pressure Neutral Limit 0 kPa 4000 kPa (580 psi) 1034 kPa (150 psi) Limit for detecting Transmission Not Responding alarm condition. Setting this parameter to Zero will disable this alarm.
Slow Vessel Mode Shift Protection Enable Time 0 sec 20 sec 5.0 sec The amount of time that the engine speed Enable Time must exceed the Low Speed Shift Protection Enable Idle Speed for SVM protection to be enabled.
Slow Vessel Mode Shift Protection Disable Time 0 sec 20 sec 5.0 sec Upon detection of a shift, the engine speed shall be held at or above Slow Vessel Mode Shift