PUMP AS-GEAR 2903628 - Caterpillar

Assembly Procedure
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.
Illustration 1 g00908098
Install seal (18) to motor (1) .
Install retaining ring (17) to motor (1) .
Install seal (16) to motor (1) .
Illustration 2 g00907935
Install seals (14) and (15) to plate (13).
Illustration 3 g00907934
Install plate (13) to motor (1) .
Illustration 4 g00907930
Install driven gear (12) and drive gear (11) to motor (1) .
Illustration 5 g00907929
Install plate (10) to motor (1) .
Illustration 6 g00907926
Install O-ring seal (9) to motor (8) .
Illustration 7 g00907924
Install body (8) to motor (1) .
Illustration 8 g00993376
Install seals (7) and (6) to motor (1) .
Install O-ring seal (5) to motor (1) .
Illustration 9 g00907333
Install cover (4) to motor (1) .
Illustration 10 g00907332
Install bolts (3) to motor (1) .
Illustration 11 g00912438
Install nut (2) to motor (1) .End By: Install the gear motor (Hydraulic fan). Refer to Disassembly and Assembly, "Gear Motor (Hydraulic Fan) - Install".