PUMP GP-GEAR 2912605 - Caterpillar

Illustration 1 g01600598
Top view
Table 1
Specification for 308-8788 Upper Frame    
Item     Qty     Part     Specification Description    
Use 5P-0960 Grease Cartridge in order to coat all the pin bores before assembly.    
A     -     -     Clearance between the pin end and the side of the cab must be kept over 10.0 mm (0.39 inch).    
1     1     385-3225 Pin As     Diameter is
79.86 0.03 mm (3.144 0.001 inch).    
2     As required, use the following shims in order to adjust the maximum lateral clearance to
1.6 mm (0.06 inch).    
2 133-2425 Shim     Thickness is
0.5 mm (0.02 inch).    
1 093-0083 Shim     Thickness is
1.0 mm (0.04 inch).    
1 093-0115 Shim     Thickness is
2.0 mm (0.08 inch).    
3     As required, use the following shims in order to adjust the maximum lateral clearance to
1.0 mm (0.04 inch).    
4 133-2717 Shim     Thickness is
0.5 mm (0.02 inch).    
2 093-0065 Shim     Thickness is
1.0 mm (0.04 inch).    
2 093-0097 Shim     Thickness is
2.0 mm (0.08 inch).    
4     2     1R-6229 Pin As     Diameter is
59.860 0.030 mm (2.3567 0.0012 inch).