2W3668 PUMP GP-GOV & FUEL INJ Caterpillar parts
980C
Rating:
Alternative (cross code) number:
CA2W3668
2W-3668
2W3668
CA2W3668
2W-3668
2W3668
Weight: 1 pounds 0 kg.
WHEEL LOADER,
Compatible equipment models: 2W3668:
Information:
No Clearance (11)This warning is located on the side face of the loader frame near the articulation hitch on both sides of the machine.
Illustration 12 g01371644
Stay back a safe distance. No clearance for a person in this area when the machine turns. Severe injury or death from crushing could occur.
Crush Hazard (12)This warning is located on the side face of the loader frame near the steering frame lock on the left side of the machine.
Illustration 13 g01371647
Crushing Hazard. There is no clearance for a person in this area when the machine turns. Severe injury or death from crushing could occur. Connect the steering frame lock between front and rear frames before lifting, transporting, or servicing the machine in the articulation area.Disconnect the steering lock and secure before resuming operation.
Battery (13)This warning is located under the left ladder behind the top step of the ladder.
Illustration 14 g01370909
Explosion Hazard! Improper jumper cable connections can cause an explosion resulting in serious injury or death. Batteries may be located in separate compartments. Refer to the Operation and Maintenance Manual for the correct jump starting procedure.
Refer to Operation and Maintenance Manual, "Engine Starting with Jump Start Cables" for more information.Seat Belt (14)This warning is located inside the cab and may be on the left or the right cab post.
Illustration 15 g01371636
A seat belt should be worn at all times during machine operation to prevent serious injury or death in the event of an accident or machine overturn. Failure to wear a seat belt during machine operation may result in serious injury or death.
High Pressure Cylinder (15)This warning is located on the accumulator in the following three locations: the service center on the right side of the machine, in the right side of the non-engine end frame and near the main hydraulic control valve.
Illustration 16 g01370912
Pressurized System!Hydraulic accumulators contain gas and oil under high pressure. DO NOT disconnect lines or disassemble any component of a pressurized accumulator. All gas pre-charge must be removed from the accumulator as instructed by the service manual before servicing or disposing of the accumulator or any accumulator component.Failure to follow the instructions and warnings could result in personal injury or death.Only use dry nitrogen gas to recharge accumulators. See your Cat dealer for special equipment and detailed information for accumulator service and charging.
Crush Hazard (16) (If Required)Where regional requirements dictate, this film is installed on both sides of the loader linkage.
Illustration 17 g03888562
Crushing Hazard! Stay back a safe distance. There is no clearance for a person in this area when the lift arms lower or raise. Failure to follow these instructions could cause serious injury or death.
Illustration 12 g01371644
Stay back a safe distance. No clearance for a person in this area when the machine turns. Severe injury or death from crushing could occur.
Crush Hazard (12)This warning is located on the side face of the loader frame near the steering frame lock on the left side of the machine.
Illustration 13 g01371647
Crushing Hazard. There is no clearance for a person in this area when the machine turns. Severe injury or death from crushing could occur. Connect the steering frame lock between front and rear frames before lifting, transporting, or servicing the machine in the articulation area.Disconnect the steering lock and secure before resuming operation.
Battery (13)This warning is located under the left ladder behind the top step of the ladder.
Illustration 14 g01370909
Explosion Hazard! Improper jumper cable connections can cause an explosion resulting in serious injury or death. Batteries may be located in separate compartments. Refer to the Operation and Maintenance Manual for the correct jump starting procedure.
Refer to Operation and Maintenance Manual, "Engine Starting with Jump Start Cables" for more information.Seat Belt (14)This warning is located inside the cab and may be on the left or the right cab post.
Illustration 15 g01371636
A seat belt should be worn at all times during machine operation to prevent serious injury or death in the event of an accident or machine overturn. Failure to wear a seat belt during machine operation may result in serious injury or death.
High Pressure Cylinder (15)This warning is located on the accumulator in the following three locations: the service center on the right side of the machine, in the right side of the non-engine end frame and near the main hydraulic control valve.
Illustration 16 g01370912
Pressurized System!Hydraulic accumulators contain gas and oil under high pressure. DO NOT disconnect lines or disassemble any component of a pressurized accumulator. All gas pre-charge must be removed from the accumulator as instructed by the service manual before servicing or disposing of the accumulator or any accumulator component.Failure to follow the instructions and warnings could result in personal injury or death.Only use dry nitrogen gas to recharge accumulators. See your Cat dealer for special equipment and detailed information for accumulator service and charging.
Crush Hazard (16) (If Required)Where regional requirements dictate, this film is installed on both sides of the loader linkage.
Illustration 17 g03888562
Crushing Hazard! Stay back a safe distance. There is no clearance for a person in this area when the lift arms lower or raise. Failure to follow these instructions could cause serious injury or death.
Caterpillar SIS machinery equipment:
Caterpillar SIS
980C WHEEL LOADER 63X00001-06574 (MACHINE) POWERED BY 3406 ENGINE »
2W-3668
PUMP GP-GOV & FUEL INJ
980C Wheel Loader 63X06575-UP (MACHINE) POWERED BY 3406 Engine »
2W-3668
PUMP GP-GOV & FUEL INJ
980C Wheel Loader 63X06575-UP (MACHINE) POWERED BY 3406 Engine »
2W-3668
PUMP GP-GOV & FUEL INJ
980C Wheel Loader 63X06575-UP (MACHINE) POWERED BY 3406 Engine »
2W-3668
PUMP GP-GOV & FUEL INJ
980C Wheel Loader 63X06575-UP (MACHINE) POWERED BY 3406 Engine »
2W-3668
PUMP GP-GOV & FUEL INJ
980C Wheel Loader 63X06575-UP (MACHINE) POWERED BY 3406 Engine »
2W-3668
PUMP GP-GOV & FUEL INJ
980C WHEEL LOADER 2XD00001-UP (MACHINE) POWERED BY 3406 ENGINE »
2W-3668
PUMP GP-GOV & FUEL INJ
980C WHEEL LOADER 13B00300-UP (MACHINE) POWERED BY 3406 ENGINE »
2W-3668
GOV & FUEL INJ PUMP GP
980C WHEEL LOADER 13B00733-UP (MACHINE) POWERED BY 3406 ENGINE »
2W-3668
GOV & FUEL INJ PUMP GP
980C WHEEL LOADER 13B00733-UP (MACHINE) POWERED BY 3406 ENGINE »
2W-3668
GOV & FUEL INJ PUMP GP
980C WHEEL LOADER 13B00733-UP (MACHINE) POWERED BY 3406 ENGINE »
2W-3668
GOV & FUEL INJ PUMP GP
980C WHEEL LOADER 13B00733-UP (MACHINE) POWERED BY 3406 ENGINE »
2W-3668
GOV & FUEL INJ PUMP GP
Caterpillar parts catalog:
Parts pump Caterpillar catalog:
9J5764
PUMP GP-GEAR
980C
980C
3G2858
PUMP GP-GEAR
824C, 980C, 980F, 980F II, R1700 II
824C, 980C, 980F, 980F II, R1700 II
9T5199
PUMP GP-GEAR
980C, 980F
980C, 980F
3848611
PUMP GP-FUEL TRANSFER
16M, 3406E, 572R II, 621H, 621K, 623H, 623K LRC, 627H, 627K LRC, 631D, 631E, 631G, 637D, 637E, 637G, 730C, 966H, 972H, 980C, C-12, C-15, C-16, C-18, C13, C15, C16, C18, D7R II, D8N, R2900G, R3000H
16M, 3406E, 572R II, 621H, 621K, 623H, 623K LRC, 627H, 627K LRC, 631D, 631E, 631G, 637D, 637E, 637G, 730C, 966H, 972H, 980C, C-12, C-15, C-16, C-18, C13, C15, C16, C18, D7R II, D8N, R2900G, R3000H
6E3524
PUMP GP-GEAR
980C, 980F, 980F II, R1700 II, R1700G
980C, 980F, 980F II, R1700 II, R1700G
1908970
PUMP GP-FUEL PRIMING
120H, 120K, 120K 2, 12H, 12K, 135H, 140K, 140K 2, 140M, 14M, 160K, 160M, 16M, 24M, 3126B, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 3...
120H, 120K, 120K 2, 12H, 12K, 135H, 140K, 140K 2, 140M, 14M, 160K, 160M, 16M, 24M, 3126B, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 3...
2W3277
PUMP GP-WATER
16G, 245, 3406, 3406B, 621B, 623B, 824C, 825C, 826C, 980C, 983B
16G, 245, 3406, 3406B, 621B, 623B, 824C, 825C, 826C, 980C, 983B
9J5763
PUMP GP-GEAR
980C
980C
2W3413
PUMP GP-FUEL INJECTION
16G, 245, 3406B, 3412, 578, 621E, 623E, 627E, 824C, 826C, 980C, SS-250
16G, 245, 3406B, 3412, 578, 621E, 623E, 627E, 824C, 826C, 980C, SS-250
1052508
PUMP AS-FUEL PRIMING
120G, 12G, 12H, 12H ES, 12H NA, 140H, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 163H, 163H NA, 16G, 16H, 16H NA, 214B, 235, 3114, 3116, 3126, 3126B, 3126E, 3176, 3176B, 3176C, 3196,...
120G, 12G, 12H, 12H ES, 12H NA, 140H, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 163H, 163H NA, 16G, 16H, 16H NA, 214B, 235, 3114, 3116, 3126, 3126B, 3126E, 3176, 3176B, 3176C, 3196,...
4W0788
PUMP AS-FUEL PRIMING
14G, 205B, 215B, 224B, 235, 245, 3114, 3116, 320 L, 330 L, 3304, 3304B, 3306, 3306B, 350, 3516, 375, 446, 528, 572G, 621, 910E, 920, 926, 936F, 943, 950B, 950F, 953, 953C, 966F, 980C, 980F, C-12, C12,...
14G, 205B, 215B, 224B, 235, 245, 3114, 3116, 320 L, 330 L, 3304, 3304B, 3306, 3306B, 350, 3516, 375, 446, 528, 572G, 621, 910E, 920, 926, 936F, 943, 950B, 950F, 953, 953C, 966F, 980C, 980F, C-12, C12,...
7T8890
PUMP AS WASHER
120M, 120M 2, 12M, 140M, 140M 2, 14M, 160M, 160M 2, 16M, 215B, 215C, 215D, 219D, 225, 225D, 227, 229, 229D, 231D, 235B, 235C, 235D, 245, 245B, 245D, 311B, 311D LRR, 312, 312B L, 312C L, 312D, 312D L, ...
120M, 120M 2, 12M, 140M, 140M 2, 14M, 160M, 160M 2, 16M, 215B, 215C, 215D, 219D, 225, 225D, 227, 229, 229D, 231D, 235B, 235C, 235D, 245, 245B, 245D, 311B, 311D LRR, 312, 312B L, 312C L, 312D, 312D L, ...
3172659
PUMP GP-GEAR
797F
797F
1035695
PUMP GP-STEERING
CB-434B, CB-434C, CB-534B, CB-534C
CB-434B, CB-434C, CB-534B, CB-534C
1767711
PUMP & MTG GP-FUEL TRANSFER
216, 216B, 226B, 232B, 242B, 247B, 257B, 3013, 3013C, 3014, 302.5, 3024, 3024C, 303.5, 304.5, 902, C1.5, C2.2, CB-214D, CB-214E, CB-334D, CB-334E, CB-335D
216, 216B, 226B, 232B, 242B, 247B, 257B, 3013, 3013C, 3014, 302.5, 3024, 3024C, 303.5, 304.5, 902, C1.5, C2.2, CB-214D, CB-214E, CB-334D, CB-334E, CB-335D
1099532
PUMP & MTG GP-MAIN HYDRAULIC
322B, 322B L, 322B LN
322B, 322B L, 322B LN
1371339
PUMP GP-WATER
24H, 3412, 3412C, 3412D, 3412E, 5110B, 651E, 657E, 773B, 773D, 773E, 773F, 775D, 775E, 775F, 844, 844H, 990, 990 II, 990H, 992C, 992D, C27, C30, C32, D10N, D10R, D8L, D9L, D9N, D9R, G3412, G3412C, PM3...
24H, 3412, 3412C, 3412D, 3412E, 5110B, 651E, 657E, 773B, 773D, 773E, 773F, 775D, 775E, 775F, 844, 844H, 990, 990 II, 990H, 992C, 992D, C27, C30, C32, D10N, D10R, D8L, D9L, D9N, D9R, G3412, G3412C, PM3...
1G8599
PUMP GP-METERING
PM-201, PM-565, PM-565B
PM-201, PM-565, PM-565B
3796604
PUMP & MOUNTING GP
CS-54B
CS-54B
2919066
PUMP GP-WATER
3024C, C2.2
3024C, C2.2
7s7400
PUMP GP-SCAVENGE & CIRCULATING
583K, 594, 594H, D8H, D8K, D9G, D9H
583K, 594, 594H, D8H, D8K, D9G, D9H
6C3020
PUMP GP-REFUELING
225D, 229D, 231D
225D, 229D, 231D