PUMP GP-WATER 3022163 - Caterpillar

Introduction
Do not perform any procedure in this Special Instruction until you have read the information and you understand the information.Safety Section
Illustration 1 g00104545Prevent the machine from movement. Park the machine on a level surface.Attach a "Do Not Operate" warning tag or a similar warning tag to the start switch or to the controls before you service the equipment . These warning tags (Special Instruction, SEHS7332) are available from your Caterpillar dealer.Required Parts
Table 1
364-0369 Chassis Wiring Gp (- 02)
Item Qty Part No. Part Name
(1) 3 3S-2093 Cable Strap
(2) 12 7K-1181 Cable Strap
(3) 2 116-0118 Clip
(4) 1 369-0113 Chassis Harness As
Illustration 2 g06204482
364-0369 Chassis Wiring Gp
Installation Procedure
Note: Make sure the 364-0370 Valve Wiring Gp is installed prior to install this wiring group.
Illustration 3 g06204492
(A) Connect to Cab Harness "POSITION C", "K856 PU", "K857 WH", "K860 BU", "K861 GN", "K869 BU", "J850 WH", "M814 BR", "M813 BU"
(1) 3S-2093 Cable Strap
(2) 7K-1181 Cable Strap
(4) 369-0113 Chassis Harness As
Connect harness to the rear of the cab and route as shown.
Illustration 4 g06204511
(2) 7K-1181 Cable Strap
(4) 369-0113 Chassis Harness As
Route harness under the boom area as shown and ground harness to the frame.
Illustration 5 g06204545
View inside the right-hand side of the main control valve compartment.
(B) Connect to VALVE HARNESS (TOOL), "K856 PU", "K857 WH", "K860 BU", "K861 GN", "K869 BU", "J850 WH", "235 BK", "M814 BR", "M813 BU"
(C) For attachment "TOOL 10", "20", "AUX", "W/ HAMMER HARNESS", "235 BK"
(1) 3S-2093 Cable Strap
(3) 116-0118 Clip
(4) 369-0113 Chassis Harness As
Route harness and connect to the 364-0370 Valve Wiring Gp at connection (B) as shown.
Illustration 6 g06204558
Connection shown wiring for machine without "Tool - 25".