PUMP GP-AUXILIARY SEA WATER 3047614 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 463-3380 Mobile Lift Cart 1
Accidental machine starting can cause injury or death to personnel working on the machine.To avoid accidental machine starting, turn the battery disconnect switch to the OFF position and remove the key. If the machine is not equipped with a battery disconnect switch, disconnect the battery cables from the battery and tape the battery clamps.Place a do not operate tag at the battery disconnect switch location to inform personnel that the machine is being worked on.
Note: The weights of the bottom guards are between 36 kg (79 lb) and 64 kg (141 lb). The bottom guards may contain 90 kg (200 lb) of rock, dirt, liquids, and debris.Each guard can be removed individually.
Illustration 1 g06126722
The blade has been removed for photographic purposes.
Use Tooling (A) and suitable cribbing to support bottom guard (2). The weight of bottom guard (2) is approximately 36 kg (79 lb). Remove bolts (1) and the washers.
Remove bottom guard (2).
Illustration 2 g06096740
Typical Example.
Use Tooling (A) to support bottom guard (4). The weight of bottom guard (4) is approximately 45 kg (99 lb).
Remove bolts (3) and the washers. Remove pins (5). Lower Tooling (A) and remove bottom guard (4).
Illustration 3 g06097107
Remove bolts (7), (8), and the washers. Remove pins (9).
Illustration 4 g06096806
Use Tooling (A) to support bottom guard (6). The weight of bottom guard (6) is approximately 64 kg (141 lb).
Remove bolts (10), lower Tooling (A), and remove bottom guard (6).Installation Procedure
Install bottom guards (6), (4), and (2) in the reverse order of removal.Lowering Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 463-3380 Mobile Lift Cart 1
Accidental machine starting can cause injury or death to personnel working on the machine.To avoid accidental machine starting, turn the battery disconnect switch to the OFF position and remove the key. If the machine is not equipped with a battery disconnect switch, disconnect the battery cables from the battery and tape the battery clamps.Place a do not operate tag at the battery disconnect switch location to inform personnel that the machine is being worked on.
Note: The weights of the bottom guards are between 36 kg (79 lb) and 64 kg (141 lb). The bottom guards may contain 90 kg (200 lb) of rock, dirt, liquids, and debris.Each guard can be removed individually.
Illustration 5 g06096839
Use Tooling (A) to secure bottom guard (4). Remove bolts (3) and the washers.
Use Tooling (A) to swing open bottom guard (4) to ground level. The bottom guard pivots on the pins.
Illustration 6 g06096870
Use Tooling (A) to secure bottom guard (6). Remove the bolts and the washers.
Use Tooling (A) to swing open bottom guard (6) to ground level. The bottom guard pivots on the pins.Raising Procedure
Install the bottom guards in the reverse order of the lowering procedure.