PUMP GP-PISTON 3153144 - Caterpillar

Use a suitable lifting device to install swivel (36) in the machine. The weight of swivel (36) is approximately 65 kg (143 lb).
Illustration 2 g01587774
Install boot (35). Install retainer (34).
Illustration 3 g01587734
Install clamp (32) and bolts (33).
Illustration 4 g01587574
Install bracket (30) and bolts (31). Install pin (29).
Illustration 5 g01587494
Install bolts (27). Connect hose assemblies (25), (26), and (28). Connect four hose assemblies (24).
Illustration 6 g01588613
Install bolts (21). Install the fittings and connect tube assemblies (23) and hose assemblies (22).
Illustration 7 g01588593
Install guard assemblies (18) and (20). Install bolts (19). The weight of each guard assembly (18) and (20) is approximately 11 kg (25 lb).
Illustration 8 g01571093
Remove Tooling (A) from the hydraulic tank. Install the cap on the hydraulic tank.
Illustration 9 g01631334
Close storage box (17) for the window guards.
Illustration 10 g01588516
Position panel (14). Install bolts (15). Install cable strap (16).
Illustration 11 g01588473
Install step (13).
Illustration 12 g01587894
Illustration 13 g01588437
Position refrigerant dryer (12). Install mounting bolts (9). Install clips (11) and (10).
Position refrigerant condenser (6). Install clamp (8). Connect harness assembly (7).
Illustration 14 g01587875
Install top mounting bolts (5). Repeat for the three bottom mounting bolts.
Illustration 15 g01587834
Install panel (3) and bolts (4).
Illustration 16 g01587794
Push housing (2) into position. Close engine hood (1).