3179348 PUMP GP-PISTON Caterpillar parts
BG-2455D
Rating:
Alternative (cross code) number:
CA3179348
317-9348
3179348
CA3179348
317-9348
3179348
Weight: 158 pounds 71 kg.
ASPHALT PAVER,
Compatible equipment models: 3179348:
Number on catalog scheme:
5
For full view, you need register
Information:
Replace the Pilot Filter
Illustration 1 g00101497
Open the access door on the right side of the machine.
Illustration 2 g00104889
Clean the area in order to keep dirt out of the filter base.
Remove the used pilot filter element from the filter base.Note: This element is a cartridge type filter. The element cannot be reused.Note: Used filters should always be disposed of according to local regulations.
Clean the filter base.
Illustration 3 g00101502
Coat the seal of a new pilot filter with clean hydraulic oil. Install the new pilot filter in the filter base. Tighten the pilot filter hand tight.
Close the access door.Replace the Case Drain Filter
Illustration 4 g00101504
The case drain filter is located on the side of the fuel tank.
Illustration 5 g00101507
Clean the area in order to keep dirt out of the filter base.
Remove the used case drain filter from the filter base.Note: This element is a cartridge type filter. The element cannot be reused.Note: Used filters should always be disposed of according to local regulations.
Clean the filter base.
Illustration 6 g00101502
Coat the seal of a new case drain filter with clean hydraulic oil. Install the new case drain filter in the filter base. Tighten the case drain filter hand tight.
Drive the machine slowly for 10 to 15 minutes. Move each cylinder evenly through several cycles.
Illustration 7 g00101508
Return the machine to the position that is shown above. Check the machine for oil leaks.
Stop the engine.
Open the access door on the right side of the machine in order to access the sight gauge.Note: On the 320B Excavator, the sight gauge is on the side of the machine. The access door does not need to be opened.
Illustration 8 g00104886
(A) High Temperature Range. (B) Low Temperature Range.
Maintain the oil level in the low temperature range for a cold machine. Maintain the oil level in the high temperature range for a machine that is at a normal operating temperature.
Illustration 9 g00101541
Slowly loosen the filler plug in order to relieve any pressure. Remove the filler plug in order to add oil, if necessary.
Clean the filler plug. Install the filler plug.
Close the access door.
Illustration 1 g00101497
Open the access door on the right side of the machine.
Illustration 2 g00104889
Clean the area in order to keep dirt out of the filter base.
Remove the used pilot filter element from the filter base.Note: This element is a cartridge type filter. The element cannot be reused.Note: Used filters should always be disposed of according to local regulations.
Clean the filter base.
Illustration 3 g00101502
Coat the seal of a new pilot filter with clean hydraulic oil. Install the new pilot filter in the filter base. Tighten the pilot filter hand tight.
Close the access door.Replace the Case Drain Filter
Illustration 4 g00101504
The case drain filter is located on the side of the fuel tank.
Illustration 5 g00101507
Clean the area in order to keep dirt out of the filter base.
Remove the used case drain filter from the filter base.Note: This element is a cartridge type filter. The element cannot be reused.Note: Used filters should always be disposed of according to local regulations.
Clean the filter base.
Illustration 6 g00101502
Coat the seal of a new case drain filter with clean hydraulic oil. Install the new case drain filter in the filter base. Tighten the case drain filter hand tight.
Drive the machine slowly for 10 to 15 minutes. Move each cylinder evenly through several cycles.
Illustration 7 g00101508
Return the machine to the position that is shown above. Check the machine for oil leaks.
Stop the engine.
Open the access door on the right side of the machine in order to access the sight gauge.Note: On the 320B Excavator, the sight gauge is on the side of the machine. The access door does not need to be opened.
Illustration 8 g00104886
(A) High Temperature Range. (B) Low Temperature Range.
Maintain the oil level in the low temperature range for a cold machine. Maintain the oil level in the high temperature range for a machine that is at a normal operating temperature.
Illustration 9 g00101541
Slowly loosen the filler plug in order to relieve any pressure. Remove the filler plug in order to add oil, if necessary.
Clean the filler plug. Install the filler plug.
Close the access door.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts pump Caterpillar catalog:
120H, 120K, 120K 2, 12K, 12M, 135H, 140G, 140K, 140K 2, 140M, 160K, 3126, 3126B, 3126E, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325...
3126E, 324D, 329D L, 330C, 330C L, 330D FM, 336D L, 521B, 522B, 627G, 637D, 637E, 637G, 814F II, 815F II, 816F II, 950H, 962H, 973C, 973D, BG-2455D, C-9, C7, C9, CX31-C9I, D6R, D6R II, D6R III, D6T, D...
120H, 120K, 120K 2, 12K, 12M, 135H, 140G, 140K, 140K 2, 140M, 160K, 3126, 3126B, 3126E, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325...
2309385
PUMP GP-PISTON
AP-1055D, AP-655D, AP1055E, AP555E, BG-2455D, BG-260D, BG1055E, BG500E, BG655D
AP-1055D, AP-655D, AP1055E, AP555E, BG-2455D, BG-260D, BG1055E, BG500E, BG655D
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 12M, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 160K, 30/30, 3116, 3126, 3126B, 3126E, 320B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L,...
2940857
PUMP GP-GEAR
AP-1055D, BG-2455D, BG-260D
AP-1055D, BG-2455D, BG-260D
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 12M, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 160K, 30/30, 3116, 3126, 3126B, 3126E, 320B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L,...
324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 328D LCR, 329D L, 330C, 330C L, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 584, 627G, 637D, 637G, 81...
324D, 324D FM, 324D FM LL, 324D L, 325D FM, 325D FM LL, 325D L, 326D L, 328D LCR, 329D, 329D L, 330D L, 330D MH, 336D, 336D L, 336D2, 336D2 L, 340D L, 340D2 L, 950H, 962H, 973D, AP-1055D, BG-2455D, BG...
2309375
PUMP GP-PISTON
BG-2455D
BG-2455D
2517170
PUMP GP-PISTON
RM-300
RM-300
2308003
PUMP GP-PISTON
RM-300
RM-300
2422469
PUMP & MTG GP-PROPEL
RM-300
RM-300
2316188
PUMP & MTG GP-PROPEL
RM-300
RM-300
2391490
PUMP GP-PISTON
AP-1055B, AP-800D
AP-1055B, AP-800D
2466456
PUMP & MTG GP-AUXILIARY
PS-150C
PS-150C
3054C, 312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 914G, CP-433E, CS-433E, IT14G, PF-300C, PS-150C
2566506
PUMP & MTG GP-VIBRATORY
CP-433E, CS-423E, CS-433E
CP-433E, CS-423E, CS-433E
3149026
PUMP & MTG GP-CONVEYOR
AP-1055D, BG-2455D
AP-1055D, BG-2455D
2309591
PUMP & MTG GP-PROPEL
BG-2455D
BG-2455D
3179349
PUMP GP-PISTON
AP-655D, BG-2455D, BG655D
AP-655D, BG-2455D, BG655D