PUMP GP-PRELUBRICATION 3249181 - Caterpillar

Start By:a. remove hydraulic tank oil filter 1. Use a lift truck to remove fender (1). Weight of the fender is 57 kg (125 lb). 2. Remove angle assembly (2). Put identification on all hose assemblies for assembly purposes.3. Disconnect hose assemblies (3). 4. Remove mirror (4) and the bracket. 5. Disconnect hose assemblies (6) and remove tube assembly (5). 6. Disconnect tube assemblies (7) and (8). 7. Remove bolts (10) and heat shield (9). 8. Install tooling (A) and a hoist on the hydraulic tank. Remove the washers and bolts from each corner of the tank. Remove hydraulic tank (11). Weight of the tank is 88 kg (195 lb). The following steps are for installation of the hydraulic tank.9. Install tooling (A) and a hoist on the hydraulic tank. Put hydraulic tank (11) in position and install the washer and bolts.10. Install heat shield (9) and bolts (10).11. Connect tube assemblies (7) and (8).12. Put tube assembly (5) in place and connect hose assemblies (6).13. Install the bracket and mirror (4).14. Connect hose assemblies (3).15. Install angle assembly (2).16. Install fender (1).End By:a. install hydraulic tank oil filter