PUMP GP-PRELUBRICATION 3262623 - Caterpillar

Illustration 1 g02638956
Front view
(3) Lever
(5) Tie rod
(6) Ball plunger assembly
(7) Bracket
(15) Cover
Table 1
Specification for 120-4501 Engine Oil Filter Gp and 4W-9968 Engine Oil Filter Gp
Item Qty Part Specification Description
1 6 6V-5048 O-Ring Seal Lubricate the bore of the O-ring seals lightly with clean engine oil.
2 4 5P-4892 O-Ring Seal
4 3 0T-0573 Bolt Torque to 55 7 N m (41 5 lb ft).
Refer to Testing and Adjusting, "Duplex Oil Filter - Adjust" for correct adjustment procedures of the fluid control valve group (8).
9 1 2W-1635 Spring Length under test force is 102.0 mm (4.02 inch).
Test force is 518 26 N (116 6 lb).
Free length after test is 143.4 mm (5.65 inch).
10 1 2W-1969 Bypass Valve The bypass valve must move freely in the bore.
Start to open pressure is 287 7 kPa (41.6 1.0 psi).
Fully open pressure is 480 7 kPa (69.6 1.0 psi).
11 1 5H-7225 Retainer Nut Torque to 45 7 N m (33 5 lb ft).
12 1 3B-7329 Nut
13 1 9M-2610 O-Ring Seal Lubricate the bore of the O-ring seals lightly with clean engine oil.
14 3 165-3931 Bolt Torque to 55 7 N m (41 5 lb ft).