3275230 PUMP GP-HYDRAULIC Caterpillar parts
SPF343C
Rating:
Alternative (cross code) number:
CA3275230
327-5230
3275230
CA3275230
327-5230
3275230
PUMPER,
Compatible equipment models: 3275230:
Number on catalog scheme:
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
B 140-7742 Sleeve 1
D 9U-5342 Pin Driver Cap 1
E 4C-9485 Pin Driver Cap 1
F 5P-0960 Grease Cartridge 1
Apply Tooling (F) to the bearings and the seals in the stick and the power link.
Illustration 1 g01215263
Attach a suitable lifting device to right hand idler link (10). The weight of right hand idler link (10) is approximately 32 kg (70 lb). Position right hand idler link (10). Use Tooling (E) in order to install pin assembly (9).
Illustration 2 g01214976
Illustration 3 g00356648
Attach a suitable lifting device to left hand idler link (7). The weight of left hand idler link (7) is approximately 32 kg (70 lb). Push pin assembly (9) through left hand idler link (7). Install bolt (8) and the nut. Tighten the outside nut until the outside nut is 0.5 mm (0.020 inch) beyond the end of bolt (8). Tighten the inside nut against the outside nut to a torque of 325 40 N m (240 30 lb ft).
Illustration 4 g01213417
Temporarily install O-ring seals (3) onto the flanges of the bucket at the pin bore for the power link.
Illustration 5 g01214065
Illustration 6 g01215012
Attach Tooling (B) and a suitable lifting device to power link (4). The weight of power link (4) is approximately 129 kg (285 lb). Position power link (4) on the rod end of the bucket cylinder and between the idler links. Apply Tooling (F) to pin assembly (6). Use Two people and Tooling (D) in order to install pin assembly (6). The weight of pin assembly (6) is approximately 27 kg (60 lb).
Install bolt (5) and the nut. Tighten the outside nut until the outside nut is 0.5 mm (0.020 inch) beyond the end of bolt (5). Tighten the inside nut against the outside nut to a torque of 325 40 N m (240 30 lb ft).
Illustration 7 g01213334
Apply Tooling (E) to pin assembly (1).
Install Tooling (D) on pin assembly (1). Use a suitable lifting device to position pin assembly (1). The weight of pin assembly (1) is approximately 54 kg (120 lb). Use Tooling (D) to install pin assembly (1).
Illustration 8 g01213478
Install bolt (2) on pin assembly (1).
Table 1
Required Tools
Tool Part Number Part Description Qty
B 140-7742 Sleeve 1
D 9U-5342 Pin Driver Cap 1
E 4C-9485 Pin Driver Cap 1
F 5P-0960 Grease Cartridge 1
Apply Tooling (F) to the bearings and the seals in the stick and the power link.
Illustration 1 g01215263
Attach a suitable lifting device to right hand idler link (10). The weight of right hand idler link (10) is approximately 32 kg (70 lb). Position right hand idler link (10). Use Tooling (E) in order to install pin assembly (9).
Illustration 2 g01214976
Illustration 3 g00356648
Attach a suitable lifting device to left hand idler link (7). The weight of left hand idler link (7) is approximately 32 kg (70 lb). Push pin assembly (9) through left hand idler link (7). Install bolt (8) and the nut. Tighten the outside nut until the outside nut is 0.5 mm (0.020 inch) beyond the end of bolt (8). Tighten the inside nut against the outside nut to a torque of 325 40 N m (240 30 lb ft).
Illustration 4 g01213417
Temporarily install O-ring seals (3) onto the flanges of the bucket at the pin bore for the power link.
Illustration 5 g01214065
Illustration 6 g01215012
Attach Tooling (B) and a suitable lifting device to power link (4). The weight of power link (4) is approximately 129 kg (285 lb). Position power link (4) on the rod end of the bucket cylinder and between the idler links. Apply Tooling (F) to pin assembly (6). Use Two people and Tooling (D) in order to install pin assembly (6). The weight of pin assembly (6) is approximately 27 kg (60 lb).
Install bolt (5) and the nut. Tighten the outside nut until the outside nut is 0.5 mm (0.020 inch) beyond the end of bolt (5). Tighten the inside nut against the outside nut to a torque of 325 40 N m (240 30 lb ft).
Illustration 7 g01213334
Apply Tooling (E) to pin assembly (1).
Install Tooling (D) on pin assembly (1). Use a suitable lifting device to position pin assembly (1). The weight of pin assembly (1) is approximately 54 kg (120 lb). Use Tooling (D) to install pin assembly (1).
Illustration 8 g01213478
Install bolt (2) on pin assembly (1).
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts pump Caterpillar catalog:
3126, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 793, 793B, 793C, 793D...
3508B, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 777D, 784C, 785, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 994, 994D, 994F, 994H, G3508, G3508B, G3512, G3512B, G3512E, G3516, G3516B, PM3512, PM35...
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130B, 5230, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784C, 785, 785B, 785C, 785D, 789B, 789C, 793C, 793D, 797, 797B, 854G, 992G, 994D, 994...
2456771
PUMP GP-ENGINE OIL
3512B, 3512C, G3512B, G3516, G3516B, G3516C, G3516E, G3516H, PMG3516, SPF343C, TH48-E80, TH55-E70, XQC1200
3512B, 3512C, G3512B, G3516, G3516B, G3516C, G3516E, G3516H, PMG3516, SPF343C, TH48-E80, TH55-E70, XQC1200
2985105
PUMP GP-WATER
420E, 430E, 450E, 914G, AP555E, BG500E, C4.4, CB-54, CB-54B, CB-64, CP-44, CS-44, CS-54, CS-54B, CW-34, D3K XL, D4K XL, D5K LGP, IT14G, IT14G2, M313D, M315D, M315D 2, M317D 2, SPF343C
420E, 430E, 450E, 914G, AP555E, BG500E, C4.4, CB-54, CB-54B, CB-64, CP-44, CS-44, CS-54, CS-54B, CW-34, D3K XL, D4K XL, D5K LGP, IT14G, IT14G2, M313D, M315D, M315D 2, M317D 2, SPF343C
2532636
PUMP GP-FUEL INJECTION
3512B, 3512C, 3516B, 3516C, SPF343C, TH48-E80
3512B, 3512C, 3516B, 3516C, SPF343C, TH48-E80
2448985
PUMP GP-ENGINE OIL
3512B, 3512C, G3512B, G3516, G3516B, G3516C, G3516E, PMG3516, SPF343C, TH48-E80, TH55-E70
3512B, 3512C, G3512B, G3516, G3516B, G3516C, G3516E, PMG3516, SPF343C, TH48-E80, TH55-E70
3056701
PUMP GP-FUEL INJECTION
C4.4, SPF343C
C4.4, SPF343C
C4.4, C6.6, CB-54B, CS-54B, CW-34, D3K XL, D4K XL, D5K LGP, M315D, SPF343C
120H, 120H NA, 135H, 135H NA, 3114, 3116, 320B, 320D GC, 320D L, 322B L, 322B LN, 322C, 322C FM, 323D L, 324D, 324D L, 324D LN, 325B L, 325C, 325D, 325D L, 326D L, 328D LCR, 329D, 329D L, 329D LN, 330...
2803185
PUMP
SPF343C, TH48-E70, TH48-E80
SPF343C, TH48-E70, TH48-E80
2517444
PUMP GP-HYDRAULIC
SPF343, SPF343C
SPF343, SPF343C
2886647
PUMP GP-AUXILIARY WATER
3508C, 3512C
3508C, 3512C
2519523
PUMP GP-PRELUBRICATION
G3512, G3516
G3512, G3516
2519522
PUMP GP-PRELUBRICATION
G3512, G3516
G3512, G3516
2519520
PUMP GP-PRELUBRICATION
G3512, G3516
G3512, G3516
3788446
PUMP GP-ENGINE OIL
3508C, D11N
3508C, D11N
2976575
PUMP GP-PISTON
305.5
305.5
2613048
PUMP GP-GEAR
SPF343C, TH48-E80
SPF343C, TH48-E80