PUMP & MTG GP-HYDRAULIC 3379698 - Caterpillar

Illustration 16 g06182211
Illustration 17 g06182226
Illustration 18 g06182233
Subtract the lift-off dimension from Dimension (Z) to obtain the correct shim thickness. The lift-off dimension is 0.25 to 0.40 mm (0.0010 to 0.106 inch).
Illustration 19 g06182246
Illustration 20 g06182270
Illustration 21 g06182516
Illustration 22 g06182519
Illustration 23 g06182521
Illustration 24 g06182525
Illustration 25 g06182536
Illustration 26 g06182541
Install O-ring seal (11), pin (6), nut (7), solenoid (8), nut (14), bushing (12), piston (13), dowel (4), spring (9), retainer (10), spring (1), retainer (3), spring (2), and bushing (5).
Illustration 27 g06182625
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Illustration 28 g06182628
Illustration 29 g06182629
Illustration 30 g06182644
Install the stops to the Measurements (X) and (Y) that were recorded in Disassembly and Assembly, "Piston Motor (Hydrostatic) - Disassemble".
End By:
Install the piston motor (hydrostatic).