3402271 PUMP GP-FUEL INJECTION Caterpillar parts
C6.6
Rating:
Alternative (cross code) number:
CA3402271
340-2271
3402271
CA3402271
340-2271
3402271
GENERATOR SET,
Compatible equipment models: 3402271:
Number on catalog scheme:
For full view, you need register
Information:
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2320 Combination Puller 1
8B-7560 Step Plate 1
B 1P-0529 Handle 1
1P-0468 Drive Plate 1
1P-0465 Drive Plate 1
C 1P-0462 Drive Plate 1
1P-0461 Drive Plate 1
1P-0529 Handle 1 Start By:
Remove the engine oil pump.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01939556
Remove bolts (2), locknut (1), and suction bell (3).
Illustration 2 g01939557
Remove idler gear (4).
Use Tooling (B) in order to remove the bearing from idler gear (4).
Remove bolt (7) and washer (6) from drive gear (5).
Use Tooling (A) in order to remove drive gear (5) from the shaft.
Illustration 3 g01939558
Remove bolts (16), bolt (12), cover (11), and O-ring seal (15) from pump body (8).
Remove shaft assembly (9) and shaft assembly (10) from pump body (8).
Remove bolt (14) and pressure relief valve (13).
Illustration 4 g01940293
Remove bearings (17) from cover (11).
Illustration 5 g01940294
Use Tooling (C) in order to remove bearings (18) from pump body (8).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2320 Combination Puller 1
8B-7560 Step Plate 1
B 1P-0529 Handle 1
1P-0468 Drive Plate 1
1P-0465 Drive Plate 1
C 1P-0462 Drive Plate 1
1P-0461 Drive Plate 1
1P-0529 Handle 1 Start By:
Remove the engine oil pump.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01939556
Remove bolts (2), locknut (1), and suction bell (3).
Illustration 2 g01939557
Remove idler gear (4).
Use Tooling (B) in order to remove the bearing from idler gear (4).
Remove bolt (7) and washer (6) from drive gear (5).
Use Tooling (A) in order to remove drive gear (5) from the shaft.
Illustration 3 g01939558
Remove bolts (16), bolt (12), cover (11), and O-ring seal (15) from pump body (8).
Remove shaft assembly (9) and shaft assembly (10) from pump body (8).
Remove bolt (14) and pressure relief valve (13).
Illustration 4 g01940293
Remove bearings (17) from cover (11).
Illustration 5 g01940294
Use Tooling (C) in order to remove bearings (18) from pump body (8).
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts pump Caterpillar catalog:
2772939
PUMP GP-WATER
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
2774262
PUMP GP-ENGINE OIL
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
938H, 953D, 963D, C6.6, D5R LGP, D6K, D6K LGP, D6K XL, D6N, IT38H, PL61
3548436
PUMP GP-FUEL INJECTION
938H, C6.6, IT38H
938H, C6.6, IT38H
938H, C6.6, IT38H
120G, 12G, 130G, 140G, 140H, 143H, 14G, 14H, 160G, 160H, 163H, 1673C, 16H, 235B, 24H, 3116, 311C, 311D LRR, 3126, 3126B, 3126E, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315C, 315D L,...
120M, 12M, 420E, 430E, 450E, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP555E, BG600D, BG655D, C4.4, C6.6, CB-54B, CP-44, CP-56, CP-64, CP-76, CS-44, CS-54, CS-54B, CS-5...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 420E, 430E, 553C, 613G, 914G, 924H, 924HZ, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG500E, BG600D, BG655D, C4.4, C6.6, CB-54, CB-54B, CB...
120M, 12M, 2470C, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 525D, 535D, 545D, 553C, 559, 613G, 924H, 924HZ, 924K, 928H, 928HZ, 930K, 938H, 938K, 950 GC, 953D, 963D, AP-600D, AP-655D,...
3353182
PUMP GP-SCAVENGE
3508B, 3508C
3508B, 3508C
3283294
PUMP GP-FUEL INJECTION
3024C, C2.2
3024C, C2.2
2516421
PUMP GP-VANE
RM-300, RM-500, RR-250B
RM-300, RM-500, RR-250B
1981089
PUMP GP-FUEL INJECTION
3014, 3024
3014, 3024
1W0820
PUMP GP-FUEL TRANSFER
3126, 3606, 3608
3126, 3606, 3608
1774278
PUMP & MTG GP-VIBRATORY
CS-663E, CS-683E
CS-663E, CS-683E
2825076
PUMP GP-FUEL INJECTION
3512C, TH55-E70
3512C, TH55-E70
2529479
PUMP GP-FUEL INJECTION
3011C, C1.1
3011C, C1.1
4167698
PUMP GP-FUEL INJECTION
AP1000E, AP1055E
AP1000E, AP1055E
