PUMP GP-METERING 3417654 - Caterpillar

Walk-Around Checks
For your own safety, and maximum service life of the tractor-scraper, make a thorough walk-around inspection before mounting the tractor-scraper or starting the engines. Check for such items as loose bolts, trash build-up, oil or coolant leaks, condition and inflation of tires and condition of cutting edges. Tractor
1. Check tractor crankcase oil level. Oil level must be in SAFE STARTING RANGE on ENGINE STOPPED side of dipstick. 2. Check tractor coolant level. Maintain level 1/2 inch (1 cm) below bottom of fill pipe. 3. Check tractor fuel level. 4. Check air cleaner service indicator. If RED piston is locked in the visible position, have air cleaner serviced. 5. Check tractor transmission oil level. Oil level should show on dipstick. 6. Check hydraulic system oil level. Maintain level above ADD mark in sight gauge, or to FULL mark on dipstick.Scraper
7. Check scraper crankcase oil level. Oil level should be above FULL mark on dipstick. 8. Check scraper transmission oil level. Oil level should show on dipstick. 9. Check scraper coolant level. Maintain level 1/2 inch (1 cm) below bottom of fill pipe. 10. Check air cleaner service indicator. If RED piston is locked in the visible position, have air cleaner serviced. 11. Check scraper fuel level.Positioning Seat
Engine must be running and driver seated well back.
Fasten seat belt securely. Always check condition of seat belt. Seat adjustment must be checked at the beginning of each shift and when operators change.
1. Open damping valve. 2. For weight adjustment, hold handle back until seat stops moving. 3. For height adjustment push lever forward. Bear down to lower seat. Ease weight to raise seat. 4. Adjust damping valve for riding comfort. 1. For a soft ride, turn handle down.2. For a firmer ride, turn handle up.3. To lock seat in position, turn handle to extreme top.