3517455 PUMP GP-AUXILIARY SEA WATER Caterpillar parts
C30, C32
Rating:
Alternative (cross code) number:
CA3517455
351-7455
3517455
CA3517455
351-7455
3517455
Weight: 71 pounds 32 kg.
MARINE ENGINE,
Number on catalog scheme:
7
For full view, you need register
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5S-1330 Valve Spring Compressor 1 Start By:
Remove the cylinder head.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
The valve spring keepers can be thrown from the valve when the valve spring compressor is released. Ensure that the valve spring keepers are properly installed on the valve stem. To help prevent personal injury, keep away from the front of the valve spring keepers and valve springs during the installation of the valves.
Illustration 1 g01137560
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Use Tooling (A) to compress valve springs (3). Remove retainer locks (1).
Remove Tooling (A). Remove spring retainer (2) and valve springs (3).
Remove valve stem seal (4), spring seat washer (5), and valves (6). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 5S-1330 Valve Spring Compressor 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01137560
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Lubricate valves (6) with clean engine oil. Install valves (6) in the cylinder head assembly. Install new valve stem seal (4) against the valve guide.
Install spring seat washer (5), valve springs (3), and spring retainer (2).
The valve spring keepers can be thrown from the valve when the valve spring compressor is released. Ensure that the valve spring keepers are properly installed on the valve stem. To help prevent personal injury, keep away from the front of the valve spring keepers and valve springs during the installation of the valves.
Note: A small amount of grease can be used to hold the valve keepers in position during installation.
Use Tooling (A) to compress valve springs (3). Install retainer locks (1). End By:
Install the cylinder head.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5S-1330 Valve Spring Compressor 1 Start By:
Remove the cylinder head.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
The valve spring keepers can be thrown from the valve when the valve spring compressor is released. Ensure that the valve spring keepers are properly installed on the valve stem. To help prevent personal injury, keep away from the front of the valve spring keepers and valve springs during the installation of the valves.
Illustration 1 g01137560
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Use Tooling (A) to compress valve springs (3). Remove retainer locks (1).
Remove Tooling (A). Remove spring retainer (2) and valve springs (3).
Remove valve stem seal (4), spring seat washer (5), and valves (6). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 5S-1330 Valve Spring Compressor 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01137560
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Lubricate valves (6) with clean engine oil. Install valves (6) in the cylinder head assembly. Install new valve stem seal (4) against the valve guide.
Install spring seat washer (5), valve springs (3), and spring retainer (2).
The valve spring keepers can be thrown from the valve when the valve spring compressor is released. Ensure that the valve spring keepers are properly installed on the valve stem. To help prevent personal injury, keep away from the front of the valve spring keepers and valve springs during the installation of the valves.
Note: A small amount of grease can be used to hold the valve keepers in position during installation.
Use Tooling (A) to compress valve springs (3). Install retainer locks (1). End By:
Install the cylinder head.
Parts pump Caterpillar catalog:
24H, 3412, 3412C, 3412D, 3412E, 5110B, 651E, 657E, 772B, 773B, 773D, 773E, 773F, 775B, 775D, 775E, 775F, 844, 844H, 990, 990 II, 990H, 992C, 992D, AD55B, AD60, C27, C30, C32, CG137-12, CX35-P800, D10N...
3306B, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3412, 3412C, 3412D, 3412E, C15, C32, D343, D346, D348, D349, D353C, D379, D379A, D379B, D398, D398A, D398B, D399
24H, 3408E, 3412C, 3412E, 631D, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 69D, 769C, 769D, 771D, 773B, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F, 775G, 775G LRC, 775G OEM, ...
24H, 3408E, 3412E, 5110B, 631E, 631G, 637E, 637G, 651E, 657E, 69D, 769C, 769D, 771D, 773B, 773D, 773E, 775D, 775E, 834B, 836, 844, 988F II, 990 II, 992C, AD40, AD45, AE40, AE40 II, C30, D10R, D9R, PM-...
2250568
PUMP GP-UNIT INJECTOR HYD
24H, 3408E, 3412E, 5110B, 631D, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 69D, 769C, 769D, 771D, 773B, 773E, 775E, 834B, 844, 988B, 990 II, 992C, AD45, AE40 II, C30, C32, D10N, D10R, D8L, D9R, PM-5...
24H, 3408E, 3412E, 5110B, 631D, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 69D, 769C, 769D, 771D, 773B, 773E, 775E, 834B, 844, 988B, 990 II, 992C, AD45, AE40 II, C30, C32, D10N, D10R, D8L, D9R, PM-5...
1539078
PUMP & MTG GP-UNIT INJ HYD
3412E, C30, C32, D10N, D10R
3412E, C30, C32, D10N, D10R
2352024
PUMP GP-UNIT INJECTOR HYD
24H, 3412E, 5110B, 631D, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 69D, 769C, 769D, 771D, 773B, 773D, 773E, 775B, 775E, 834B, 844, 988B, 988F II, 990, 990 II, 992C, AD45, AE40 II, C30, C32, D10N, D...
24H, 3412E, 5110B, 631D, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 69D, 769C, 769D, 771D, 773B, 773D, 773E, 775B, 775E, 834B, 844, 988B, 988F II, 990, 990 II, 992C, AD45, AE40 II, C30, C32, D10N, D...
3412, 3412C, 3412D, 3412E, 5110B, 651E, 657E, 773B, 773D, 773E, 773F, 775B, 775D, 775E, 775F, 844, 844H, 990, 990 II, 990H, 992C, AD55B, AD60, C27, C32, CG137-12, CX35-P800, D10N, D10R, D8L, D9L, D9N,...
24H, 3412, 3412C, 3412D, 3412E, 5110B, 651E, 657E, 773B, 773D, 773E, 773F, 775D, 775E, 775F, 844, 844H, 990, 990 II, 990H, 992C, 992D, C27, C30, C32, D10N, D10R, D8L, D9L, D9N, D9R, G3412, G3412C, PM3...
1566903
PUMP GP-AUXILIARY SEA WATER
3412E, C32
3412E, C32
1974854
PUMP GP-AUXILIARY SEA WATER
3412E, C32
3412E, C32
1912337
PUMP GP-ENGINE OIL
3412E, C32
3412E, C32
2154721
PUMP GP-GEAR
CB-634D
CB-634D
120H, 135H, 3126B, 3126E, 561N, 938G II, 953C, 963C, D5N, D6N, IT38G II
8X0592
PUMP & MTG GP-CUSHION-HITCH
631E, 637E
631E, 637E
4W5641
PUMP GP-GOV & FUEL INJ
225, 227, 229, 3208, CB-614, CS-551, PS-500
225, 227, 229, 3208, CB-614, CS-551, PS-500
1137247
PUMP AR-HYDRAULIC
65C, 75C, 75D, 85C, 85D
65C, 75C, 75D, 85C, 85D
3054, 307, 312, 315, 317, 416B, 416C, 426C, 428B, 428C, 436C, 438C, 914G, AP-800C, BG-225B, CB-434B, CB-544, CB-545, IT14G, TH62, TH63, TH82, TH83
7W9823
PUMP GP-GOV & FUEL INJ
3306, 3306B
3306, 3306B
4J0889
PUMP ASSEMBLY
141, 191
141, 191
1550072
PUMP GP-WATER
3304, 3304B, 3306, 3306B
3304, 3304B, 3306, 3306B
3783179
PUMP & MTG GP-DEF
336F L, 349F L, 374F L, 390F L, 525D, 535D, 545D, 555D, 621K, 623K, 627K, 725C, 730C, 770G, 770G OEM, 772G, 772G OEM, 824K, 825K, 826K, 834K, 836K, 966M, 966M XE, 972M, 972M XE, 980M, 982M, 988K, C13,...
336F L, 349F L, 374F L, 390F L, 525D, 535D, 545D, 555D, 621K, 623K, 627K, 725C, 730C, 770G, 770G OEM, 772G, 772G OEM, 824K, 825K, 826K, 834K, 836K, 966M, 966M XE, 972M, 972M XE, 980M, 982M, 988K, C13,...
824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 980G, 980G II, 980H