PUMP GP-GEAR 3671935 - Caterpillar

will continue to run until engine control switch (8) is turned to automatic position (6) .
Turn engine control switch (8) to Stop/Reset position (7) .Automatic Operation
Remove the remote start signal. When the remote stop delay timer expires, the load is disconnected. The generator will turn off. The engine will then run at idle during the cooldown timer.
Turn engine control switch (8) to Stop/Reset position (7) .Premium Control Panel
Note: TYPE 1 & 2
Illustration 5 g00829205
Premium control panel (Type 1) (1) Control module (2) Horn (3) Emergency stop push button (4) Alarm silence
Illustration 6 g01110860
Premium Control panel (Type 2) (1) Control module (2) Horn (3) Emergency stop button (4) Alarm silence
Illustration 7 g01115369
Close up of the control module (Type 1) (5) Stop/Reset button (6) Start button (7) Manual mode button (8) Automatic mode button
Illustration 8 g01112313
Close up of the control module (Type 2) (5) Stop/Reset button (6) Start button (7) Manual mode button (8) Automatic mode buttonManual Operation
Press Stop/Reset button (5). The LCD display will indicate "STOP/RESET". The engine will then slow down. The LCD display will indicate "STOPPING".Note: If the engine fails to stop running, the LCD display will indicate "SHUTDOWN FAIL TO STOP". The alarm will sound.
Once the engine has stopped, the LCD display will indicate "GENERATOR AT REST".Automatic Operation
Once the return timer has expired, the control module will de-energize the load transfer output. The cool down timer will start. This will allow the engine to cool down properly. The LCD display will indicate "COOLING DOWN".
The LCD display will indicate "STOPPING".Note: If the engine fails to stop running, the LCD display will indicate "SHUTDOWN FAIL TO STOP". The alarm will sound.
Once the engine has stopped, the LCD display will indicate "GENERATOR AT REST".MCS Control Panel
Note: TYPE 1 & 2
Illustration 9 g01110964
MCS Control Panel (Type 1) (1) Shutdown override key switch (2) Emergency stop push button (3) Horn (4) Control Module with display
Illustration 10 g01110984
MCS Control Panel (Type 2) (1) Shutdown override key switch (2) Emergency stop push button (3) Horn (4) Control Module with displayShutdown Override Key Switch (1) - This should be switched to the off position for normal use and the key should be removed for safe keeping. Activation of this key switch will enable the engine to continue to run even when a shutdown signal is received.Emergency Stop Push Button (2) - The emergency stop push button (ESPB) is used to shut down the engine during an emergency situation. The ESPB shuts off the fuel.Horn (3) - The horn activates when one of the a fault (alarm or shutdown signal) is received by the controller and the fault is indicated with text on the controller display. The horn can be silenced by pressing the ACK or acknowledge button on the controller.MCS Control Module With Display (4) - The control module controls the functions of the generator set.
Illustration 11 g01112681
Close up of the control module (Type 1) (5) Start Button (6) Stop/Reset Button (7) Mode Selection Button
Illustration 12 g01112696
Close up of the control module (Type 2) (5) Start Button (6) Stop/Reset Button (7) Mode