PUMP GP-GR B 3694463 - Caterpillar

Illustration 10 g01219478
Press the Connect icon (6) in the tool bar at the top of the window. The information uploads from the controller and a screen similar to the one shown in Illustration 11 appears.
Illustration 11 g01219479
Download the Configuration File to the Controller
Illustration 12 g01219481
Press the Flash icon (7) on the tool bar at the top of the window in order to download the configuration file to the device. Click OK.
If prompted for a password, enter the value 2000 and then select OK.
Locate the configuration file on the PC and then select Open.
When prompted, click Yes in order to erase the existing program and download (flash) the selected program.
After the selected program has been successfully flashed, then select OK in order to reboot the controller.Downloading the Parameter File to the Controller [OPTIONAL]
Note: This section only applies if the existing parameters were optionally uploaded to the PC prior to loading the CAT configuration file to the controller.After the CAT configuration file has been loaded into the controller, then the optionally created parameter file may be downloaded to the controller.Note: Prior to completing the following procedure, ensure that the CAT utility software has been installed.Reference""Installing the CAT Utility software""
Select Parameters in the tool bar that is located to the left of the main window. The "Parameters" window opens.
In the Parameters window, select Open File.
Illustration 13 g01218781
Select the required Parameter file and then select Open. A screen similar to the one shown in Illustration 13 appears.This screen lists parameter information such as the category, the channel, a textual description, and other values associated with the parameter.
Illustration 14 g01218782
Select the Start communication (8) icon in the tool bar that is located at the top of the main window.
If prompted for a password, enter a value of 2000 and then select OK.
Select Yes in order to download the parameters to the controller.Adjusting the Controller Parameters [OPTIONAL]
After the CAT configuration file and the optionally created parameter file have been downloaded to the controller, then the parameters can be adjusted using one of two methods.If needed, the parameters can be adjusted by using either the front panel of the controller, or else by using the Utility software.Adjusting Parameters Using the Utility Software
Select Parameters in the tool bar that is located to the left of the main window. The "Parameters" window opens.
In the Parameters window, select Open File.
Select the required Parameter file and then select Open. A screen appears listing parameter information such as the category, the channel, a textual description, and other values associated with the parameter.
Double-click the parameter that is to be adjusted.Note: When adjusting a parameter, be aware that related parameters may also need to be adjusted, for example, Nominal Voltage and Power Output.Max.
Modify the values of the parameter as required by selecting the value and entering the new setting in the field.
Illustration 15 g01219809
Select or deselect the check box fields in order to enable or disable the function. A function that is enabled will display a check mark (9) in the check box.
After all changes are complete,