PUMP GP-PISTON 3696595 - Caterpillar

Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact the skin.
Ensure that the engine is stopped before any servicing or repair is performed.
The crankcase breather is a very important component in order to keep your engine emissions compliant.
The filter element within the crankcase breather must be serviced at the prescribed service interval.
The correct filter element must be installed before the engine is operated.
The installation of the filter element is very important.
The quality of the filter element that is installed is very important.
The filter element protects the engine from excessive quantities of oil from entering the induction system. The filter element also protects the engine aftertreatment system.Note: Excessive quantities of oil that enter the induction system of the engine can rapidly increase the engine speed without control.
Illustration 1 g03331718
Typical example
Ensure that dirt cannot enter the breather assembly. Ensure that the outside body of the breather assembly is clean and free from damage. Place a container under the breather assembly.
Remove clip (3) and remove hose (4) from cap (2). Remove cap (2) from the main body (1).
Illustration 2 g03331704
Typical example
Remove filter element (5) and remove O ring seal (6) and discard. Note: Ensure that all parts are clean and free from dirt.
Install a new O ring seal (6) onto the cap (2) and install a new filter element (5) into the cap (2).
Install cap assembly into the main body (1). Tighten the cap assembly to 10 N m (7 lb ft).
Install hose (4) and clip (3). Remove the container and clean away any split fluid.