PUMP & MOTOR GP-SEC STEERING 3697919 - Caterpillar

Installation Procedure
Check all of the O-ring seals and the components for wear or damage. Replace the components, if necessary.
Lubricate all of the O-ring seals lightly with the lubricant that is being sealed.
Illustration 1 g00562143
Install filter base (1), three bolts (9) and the hard washers to the frame assembly.
Install pressure switch assembly (10) to filter base (1).
Illustration 2 g00562132
Connect hose assembly (8) to filter base (1).
Illustration 3 g00562130
Connect wire harness (7) at the electrical connection. Install the electrical connection to the clip.
Illustration 4 g00562096
Install block (5), the O-ring seal and hose assembly (6) to filter base (1). Connect hose assembly (4) to block (5).
Illustration 5 g00562170
Install filter (3) and (2) to filter base (1).
Check the level of hydraulic oil in the torque converter sump. Refer to Operation and Maintenance Manual, SEBU7092, "Torque Converter Sump Oil Level - Check".