PUMP GP-WATER 3744752 - Caterpillar

System Labeling
The applicant must ensure that identical, legible, and durable labels are affixed on both the diesel emission control strategy and the engine (or an alternate location approved by the Executive Officer) on which the verified diesel emission control strategy is installed except as noted in (3) below. All labels must be constructed and affixed so that the labels resist tampering. All labels must be constructed and affixed so that the labels remain legible for the duration of the diesel emission control strategy minimum warranty period. One label shall be welded, riveted, or otherwise permanently attached to the diesel emission control strategy and the other affixed to the engine in such a manner that the label cannot be easily removed (for example, bolted). The required labels must identify the name, address, and phone number of the manufacturer, the diesel emission control strategy family name (defined in (2) below) of the installed system, a unique serial number, and the month and year of manufacture. The month and year of manufacture are not required on the label if this information can be readily obtained from the applicant by referencing the serial number. The applicant and/or installer must ensure that the label is visible after installation. If the original strategy label is damaged, destroyed, or missing, the device manufacture shall issue an ARB approved replacement. The replacement label must be identical to the original label except for the words "REPLACEMENT LABEL" which must be included at the bottom line of information. A sample scale drawing of the original and replacement labels must be submitted with the verification application. The end user must notify the applicant in the event of a damaged, destroyed, or missing original strategy label. The applicant must issue a replacement label within 45 days of notification by an end user of a damaged, destroyed, or missing label. All labels must be approved by the Executive Officer and must only be used with an ARB verified diesel emission control strategy. Unless an alternative is approved by the Executive Officer, the label information must be in the following format:
1. Name, Address, and Phone Number of Manufacturer
2. Diesel Emission Control Strategy Family Name
3. Product Serial Number
4. (optional) ZZ-ZZ (Month and Year of manufacture, for example, 06-02)
5. Replacement label (Replacement Label to be used only when a replacement of the original label has been issued by the device manufacturer).Diesel Emission Control Strategy Family Name. Each diesel emission control strategy shall be assigned a family name defined as below:Diesel Emission Control Strategy Family Name
Each diesel emission control strategy shall be assigned a family name "CA/MMM/YYY/PM#N##/AP/XXXXX" defined below:CA - Designates a diesel emission control strategy verified in California.YYYY - Manufacturer code (assigned by the executive Officer).PM# - PM verification level 0, 1, 1+, 2, 2+, 3, or 3+ (for example, PM3 means a level 3 PM emission control system).N## - NOx verified reduction level in percent, if any (for example, N25 means NOx reduction of 25 percent).AP - Verified application that includes one of