PUMP 3756447 - Caterpillar

Front of the Machine
Illustration 1 g01146790In order to lift the front of each side of the machine, use suitable tooling that can be secured in the raised position (55 ton minimum capacity). Place this tooling under the flat surface on the bottom on casting (1) which is used to mount the front suspension cylinder. The tooling should be placed near the welded joint between the casting and the front frame crossmember that is under the engine.In order to secure the front suspension cylinder on each side of the machine, use suitable tooling that can be mechanically secured in the raised position (20 ton minimum capacity). Place this tooling under front suspension cylinder (2) in order to prevent the extension of the cylinder.Rear of the Machine
Illustration 2 g01160631In order to raise the rear of the machine, use suitable tooling that can be mechanically secured in the raised position (55 ton minimum capacity). Place this tooling under the flat surface on the bottom of the differential housing. The tooling should be placed in front of bracket (3) which is used to mount the rear suspension cylinder.Note: Do not attempt to raise the rear of the machine with the lift stands between the two rear suspension cylinders.