PUMP GP-FUEL INJECTION 3763432 - Caterpillar

Illustration 1 g01252406
Adjust the control lever so that the rod is vertical. Operate the control lever through all of the operating positions in order to ensure proper working order. If necessary, adjust the control linkage. (1) 276-6655 Rod Assembly Distance from pin to pin ... 175 3 mm (6.90 0.10 inch) Torque for locknuts ... 25 6 N m (19 4 lb ft) (2) Torque for nut ... 25 6 N m (19 4 lb ft) (3) 276-6656 Rod Assembly Distance from pin to pin ... 211 3 mm (8.30 0.10 inch) Torque for locknuts ... 25 6 N m (19 4 lb ft) (4) Torque for nut ... 60 12 N m (45 9 lb ft) (5) 276-6660 Rod Assembly Distance from pin to pin ... 209 3 mm (8.25 0.10 inch) Torque for locknuts ... 25 6 N m (19 4 lb ft) (6) Torque for four bolts ... 55 10 N m (41 7 lb ft) (7) Installation depth of the control rod ... 16 2 mm (0.65 0.08 inch) (8) Pack the bearings and the cavities with 1P-0808 Multipurpose Grease. Drive the bearings on the stamped end only. Lubricate the lips of the seals with the lubricant that is being sealed. This specification is used in four places. (9) 276-6658 Rod Assembly Distance from pin to pin ... 99 3 mm (3.90 0.10 inch) Apply 4C-4030 Thread Lock Compound to the threads and the rod ends. ... (10) Installation depth of the bearings ... 4.5 0.5 mm (0.18 0.02 inch)