PUMP GP-WATER 3764215 - Caterpillar

Illustration 1 g03002302Note: Apply engine oil to the threads of the bolts prior to assembly
Table 1
Tightening torque Connecting rod bolts 69 N m (51 lb ft) to 73 N m (54 lb ft) Connecting Rod Alignment
Note: Make sure that the oil clearance of the small end bushing is less than the allowable limit.
Illustration 2 g02914158
Install the connecting rod on the alignment tool of the connecting rod.
Put a gauge on the piston pin, and move it against the face plate.
If the gauge does not touch fully against the face plate, measure the space between the gauge pin and face plate.
Table 2
Connecting rod alignment Allowable limit 0.05 mm (0.002 inch)