PUMP GP-MAIN HYDRAULIC 3947450 - Caterpillar

Twin Turbocharger Configuration
Illustration 1 g00364897
Rear view of engine
Illustration 2 g00364898
Right side of the engine (1) Apply 5P-3413 Pipe Sealant to the threads of the studs. (2) Lubricate the seal bores lightly with glycerin or with clean engine oil. (3) Rear face of cylinder blockSeries Turbocharger Configuration
Illustration 3 g00365512
Right side of cylinder block (1) (2) Lubricate the O-ring seals with a thin layer of glycerin or with clean engine oil. (X) The clamp must be installed at the following distance. ... 150.0 25.0 mm (5.91 0.98 inch)
Illustration 4 g00365513
Right side rear view (3) (4) Lubricate the O-ring seals with a thin layer of glycerin or with clean engine oil.
Illustration 5 g00365514
Left side rear view (5) (6) Lubricate the O-ring seals with a thin layer of glycerin or with clean engine oil.
Illustration 6 g00365516
Left side of cylinder block (7) Lubricate the O-ring seals with a thin layer of glycerin or with clean engine oil. (8) Use 5P-3413 Pipe Sealant on the threads of the studs before assembly. (9) Lubricate the O-ring seals with a thin layer of glycerin or with clean engine oil.Single Turbocharger Configuration
Illustration 7 g00364833
Rear view (1) Apply 5P-3931 Anti-Seize Compound to the threads before assembly. (2) Apply 5P-3413 Pipe Sealant to the threads before assembly. (3) Lubricate the bore lightly with the lubricant that is being sealed.
Illustration 8 g00364836
(4) Lubricate the bore lightly with clean engine oil.