PUMP G-HYD 3C7357 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     185-3630     Strap Wrench Assembly     1    
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant system. Refer to Operation and Maintenance Manual, "Refill Capacities and Recommendations".
Illustration 1 g01261004
Remove nuts (1) . Remove bracket (2) and the hose assembly. Use Tooling (A) and remove oil filter (3) .
Illustration 2 g01261010
Remove bolts (4) . Remove engine oil filter base (5) and the gasket.
Illustration 3 g01261014
Remove oil cooler (6) and the gasket. Remove O-ring seals (7) .