PUMP GP-PISTON 3G3287 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-3145 Load Leveling Beam 1
B 189-0409 Shackle As 2
Illustration 1 g01154348
Illustration 2 g01154375
Attach Tooling (A), Tooling (B), and a suitable lifting device to radiator module (26) and position radiator module (26). The weight of radiator module (26) is approximately 345 kg (760 lb).
Install bolts (27). Repeat for the opposite side.
Illustration 3 g01154228
Connect hoses (22). Connect hose assembly (23).
Connect brackets (25) to tank assembly (24).
Illustration 4 g01154213
Connect hose assemblies (18) and (21). Connect hoses (19) and (20).
Illustration 5 g01154079
Position bracket (17) and install bolts (16).
Illustration 6 g01153906
Position tank assembly (15) and install bolts (14). Connect harness assemblies (13).
Position cylinder assembly (10) and install bolt (12). Tighten clamp (11).
Install all mounting hardware on hoses (9).
Illustration 7 g01153829
Position refrigerant condenser (8) and install bolts (7).
Illustration 8 g01153580
Attach a suitable lifting device to hydraulic oil cooler (5). The weight of hydraulic oil cooler (5) is approximately 27 kg (60 lb).
Position hydraulic oil cooler (5) and install bolts (6).
Illustration 9 g01153568
Install grill assembly (4).
Illustration 10 g01153561
Attach a suitable lifting device to fan assembly (1). The weight of fan assembly (1) is approximately 27 kg (60 lb).
Position fan assembly (1) in shroud assembly (3). Install bolts (2).
Refill the cooling system. Refer to Operation and maintenance Manual, "Cooling System Coolant (ELC) - Change ". End By:
Install the fan guards. Refer to Disassembly and Assembly, "Fan Guards - Remove and Install".
Install the front hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".