PUMP GP-GEAR 3G5046 - Caterpillar

Be sure the contact surfaces of the flywheel housing and the block are clean and free of any foreign material. Clean the contact surfaces with 8T9011 or 4C4079 Component Cleaner. Put an application of 1U8846 Gasket Maker on the contact surface of the flywheel housing. A 1.5 mm (.06 in) bead of 1U8846 Gasket Maker down the middle of the contact surface and around each bolt hole. Spread the bead of of gasket maker into a thin even thickness over the contact surface.(1) Tighten flywheel housing bolts with the procedure that follows:a. Tighten bolts 1 through 19 in number sequence to a torque of ... 40 7 N m (30 5 lb ft)b. Tighten bolts 1 through 9 in number sequence to a torque of ... 135 15 N m (100 11 lb ft)c. Tighten bolts 10 through 19 in number sequence to a torque of ... 55 7 N m (40 5 lb ft)(2) Maximum permissible change from an exact vertical face (face runout) at 4 points (total indicator reading) ... 0.38 mm (.015 in)(3) Torque for plug (Put 5P3413 Pipe Sealant on the threads at assembly) ... 9.5 1.5 N m (80 13 lb in)