PUMP GP-GEAR 4177835 - Caterpillar

Product Identification Number (PIN)
Illustration 1 g02149759
Illustration 2 g06201159Manufacturer Name and Address ____________________Model (A)____________________Build (B)____________________Product Identification Number (C)____________________Bar Code (D)____________________Month and Year of Manufacture Plate (If Required) (E)____________________CE Plate (If Required) (F)____________________Address of Manufacturer (G)____________________Issue (H)____________________Country of Origin Info Plate (If Required) (I)____________________Local regulation may require documentation of the month and/or year of manufacture in the Operation and Maintenance Manual. Enter on line (E) above if required.European Union
Illustration 3 g01880193This plate is positioned on the bottom left side of plate (1) for the PIN.Note: The CE plate is on machines that are certified to the European Union requirements that were effective at that time.For machines compliant to 2006/42/EC, the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided below.
Engine Power Primary Engine (kW)____________________
Engine Power for Additional Engine (If Equipped) ____________________
Typical Machine Operating Weight for European Market (kg)____________________
Year of Construction____________________
Machine Type ____________________For the name and address of the manufacturer, and the country of origin of the machine, refer to the PIN plate.Serial Number Plate (SN)
Illustration 4 g01254667 (2) Dump Body Serial Number ____________________
Illustration 5 g01254670 (3) Transmission Serial Number____________________
Illustration 6 g02664864 (4) Engine Serial Number____________________
Illustration 7 g01254688 (5) Torque Converter Serial Number____________________The following serial numbers are stamped on each of the following components:Differential Serial Number____________________Left Wheel Station Serial Number____________________Right Wheel Station Serial Number____________________Certification
ROPS/FOPS Plate
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
This machine has been certified to the standards that are listed on the certification plate. The maximum mass of the machine, which includes the operator and the attachments without a body or a payload, should not exceed the mass on the certification plate.
Illustration 8 g01953246This certification plate is located inside the cab.Eurasian Economic Union
For machines compliant to the Eurasian Economic Union requirements, the EAC mark plate is positioned near the Product Identification Number (PIN) plate (see Product Information Section of the machine Operation and Maintenance Manual). The EAC mark plate is placed on machines certified to the Eurasian Economic Union requirements effective at the time of market entry.
Illustration 9 g06094564The Month and Year of Manufacture are on the PIN plate.Manufacturer Information
Manufacturer:Caterpillar Inc.,
100 N.E. Adams Street
Peoria, Illinois 61629, USA
Entity authorized by the manufacturer at the territory of Eurasian Economic Union:Caterpillar Eurasia LLC
75, Sadovnicheskaya Emb.
Moscow 115035, Russia