PUMP GP-2PS-E- 4208636 - Caterpillar

Illustration 4 g03289078
View of the left side of a typical CG137-08 Petroleum Engine
(1) Universal warning
(3) Electrical shock
(4) Canadian Standards Administration - Do not disconnect Universal Warning (1)
Illustration 5 g01370904One safety message is located towards the front of the valve cover base on both sides of the engine.
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Cat dealer for replacement manuals. Proper care is your responsibility.
Canadian Standards Administration - Do Not Disconnect (2)
Illustration 6 g03290976One safety message may be located on the box for the electronic control module (ECM).
Do not disconnect equipment unless power has been disconnected or the area is known to be non-hazardous. Explosion hazard: Substitution of components may impair suitability for Class 1, Division 2.
Shock Hazard (3)
Illustration 7 g01372247One safety message is located towards the rear of the valve cover base on both sides of the engine.
! Shock/Electrocution Hazard! Read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could cause serious injury or death.
Canadian Standards Administration - Do Not Disconnect (4)
Illustration 8 g02561597
Safety message for a 24V 35A alternator
One safety message may be located on the alternator.
Do not disconnect equipment unless power has been disconnected or the area is known to be non-hazardous. Explosion hazard: Substitution of components may impair suitability for Class 1, Division 2.
Canadian Standards Administration - Do Not Disconnect (4)
Illustration 9 g01371139
Safety message for a 24V 65A alternator
One safety message may be located on the alternator.
Do not disconnect equipment unless power has been disconnected or the area is known to be non-hazardous. Explosion hazard: Substitution of components may impair suitability for Class 1, Division 2.
Canadian Standards Administration - Do Not Disconnect (5)
Illustration 10 g02561600One safety message may be located on the box for the controller.
Do not disconnect equipment unless power has been disconnected or the area is known to be non-hazardous. Explosion hazard: Substitution of components may impair suitability for Class 1, Division 2.