PUMP & MTG GP-GEAR 4302912 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2
Illustration 1 g01287417
Illustration 2 g01287407
Install O-ring seals (34). Install O-ring seal (33). Install tube (32). Install bolts (29). Install housing (30). Install bolts (29).
Illustration 3 g01287406
Install stem (25), shims (26), retainer (27), and spring (28) for the regulator valve into regulator assembly (11). Install stem (21), shims (22), retainer (23), and spring (24) for the maximum pressure relief valve into regulator assembly (11).
Illustration 4 g01558136
Install O-ring seals (20).
Illustration 5 g01558135
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install cover (19) onto regulator assembly (11). Install the washers and bolts (18).
Illustration 6 g02146719
Illustration 7 g01242497
Install the flange assembly and elbow (15). Install bolts (14).
Attach Tooling (A) and a suitable lifting device onto engine oil pump (17). The weight of engine oil pump (17) is approximately 67 kg (147 lb). Position engine oil pump (17) onto the engine. Install bolts (16).
Install bolts (13).
Illustration 8 g02146893
Attach a suitable lifting device onto manifold (11). The weight of manifold (11) is approximately 34 kg (75 lb). Position manifold (11) on the engine oil pump. Install bolts (12).
Illustration 9 g02146717
Connect tube assembly (10). Install bolts (9). Connect tube assembly (8). Install bolts (7). Install hose assembly (6).
Illustration 10 g02146716
Install the gaskets and the end section of air inlet manifold (4). Install bolts (3). Install bolt (5).
Illustration 11 g02146707
Position cover (1) for the harness assembly onto the air inlet manifold. Install bolts (2).