PUMP GP-GEAR 4503516 - Caterpillar

4503516 PUMP GP-GEAR Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4503516
450-3516
4503516

Weight: 14 pounds 6 kg.

Buy PUMP GP-GEAR 4503516 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 1

Caterpillar 4503516 Parts scheme PUMP GP-GEAR

For full view, you need register

Information:

Replacement of the Cylinder Sleeve for the 3064 and 3066
Replace all cylinder liners that exceed the service limit of 102.700 mm (4.0433 inch).Use the following procedure in order to repair the cylinder liners.
Illustration 4 g01234057
(9) Cylinder Liner
Set up a boring machine on the cylinder block. Align the boring machine with the center of the bottom of the cylinder liner with the less worn area.
Bore the liner until the thickness is 0.50 mm (0.020 inch).
Illustration 5 g00529962
Remove the remainder of the liner. Be careful not to damage the cylinder block.
Install a new liner. Use the Sleeve Installer in order to install a replacement sleeve.
Install the sleeve into the cylinder block and leave a liner projection of 0.30 mm (0.012 inch) to 0.50 mm (0.020 inch) at the top of the block. Then make the liner flush with the top of the cylinder block.
Bore the sleeve and hone the sleeve to the correct specifications that is referenced in Table 3.