PUMP GP-AUXILIARY SEA WATER 4730551 - Caterpillar

for any other exceptions that may change the maintenance intervals.Note: The aftertreatment system can be expected to function properly for the useful life of the engine (emissions durability period), as defined by regulation. All prescribed maintenance requirements must be followed.Note: Before each consecutive interval is performed, all maintenance from the previous interval must be performed.When Required
Battery - Recycle
Battery or Battery Cable - Inspect/Replace
Cab Air Filter - Clean/Replace
Circuit Breakers - Reset
Engine Air Filter Primary Element - Clean/Replace
Engine Air Filter Secondary Element - Replace
Fuel System - Prime
Fuses - Replace
Hydraulic Tank Breaker Relief Valve - Clean
Oil Filter - Inspect
Receiver Dryer (Refrigerant) - Replace
Water Cleaning System (Pressurized) - Purge
Windows - Clean
Every 10 Service Hours or Daily
Cooling System Coolant Level - Check
Engine Oil Level - Check
Fuel System Primary Filter (Water Separator) - Drain
Hydraulic System Oil Level - Check
Pump Drive Oil Level - Check
Seat Belt - Inspect
Transmission Gearbox Oil Level - Check
Every 50 Service Hours
Tire Inflation - Check
Every 50 Service Hours or Weekly
Differential and Final Drive Oil Level - Check
Fuel Tank Water and Sediment - Drain
Linkage - Lubricate
Every 250 Service Hours or Monthly
Articulation Bearings - Lubricate
Battery - Clean
Belts - Inspect/Adjust/Replace
Brake Accumulator (Service) - Check
Machine Drift on a Slope - Check
Transmission Gearbox Oil Sample - Obtain
Water Cleaning System (Pressurized) - Test
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
Cooling System Coolant Sample (Level 2) - Obtain
Every 500 Service Hours
Differential and Final Drive Oil Sample - Obtain
Engine Oil Sample - Obtain
Hydraulic System Oil Sample - Obtain
Pump Drive Oil Sample - Obtain
Every 500 Service Hours or 3 Months
Cooling System Coolant Sample (Level 1) - Obtain
Engine Oil and Filter - Change
Fuel System Primary Filter (Water Separator) Element - Replace
Fuel Tank Cap and Strainer - Clean
Hydraulic System Oil Filter - Replace
Transmission Gearbox Oil - Change
Every 1000 Service Hours
Battery Hold-Down - Tighten
Rollover Protective Structure (ROPS) - Inspect
Every 2000 Service Hours or 1 Year
Brake Discs - Check
Differential and Final Drive Oil - Change
Hydraulic System Oil - Change
Pump Drive Oil - Change
Receiver Dryer (Refrigerant) - Replace
Every Year
Cooling System Coolant Sample (Level 2) - Obtain
Every 3 Years After Date of Installation or Every 5 Years After Date of Manufacture
Seat Belt - Replace
Every 6000 Service Hours or 3 Years
Cooling System Water Temperature Regulator - Replace
Every 12 000 Service Hours or 6 Years
Cooling System Coolant (ELC) - Change