PUMP GP-GR A 4802297 - Caterpillar

Illustration 1 g00821097
Install suitable blocks under each end section of the cutting edge. The bowl must be level.
Illustration 2 g01034444
Attach Tooling (A) and a suitable lifting device to apron (1) .
Illustration 3 g00821100
Remove pin assembly (3) in order to disconnect apron (1) from link assembly (2) .
Illustration 4 g00821101
Lower apron (1) onto suitable blocks.
Illustration 5 g00821102
Attach a suitable lifting device around frame assembly (4). The weight of frame assembly (4) is approximately 178 kg (393 lb).
Remove pin assembly (5) .
Illustration 6 g01034454
Lower frame assembly (4) onto suitable blocks and reposition the suitable lifting device. Attach Tooling (B) onto frame assembly (4) .
Remove pin assembly (7) and shims (6) (not shown).
Remove frame assembly (4) .Installation Procedure
Table 2
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7574     Link Bracket     1    
B     1U-9200     Lever Puller Hoist     1    
Illustration 7 g01034454
Attach Tooling (B) and a suitable lifting device onto frame assembly (4). The weight of frame assembly (4) is approximately 178 kg (393 lb).
Position frame assembly (4). Install shims (6) (not shown) and pin assembly (7) .
Lower frame assembly (4) onto suitable blocks.
Illustration 8 g00821102
Remove Tooling (B). Reposition the suitable lifting device on frame assembly (4) .
Install pin assembly (5) .
Illustration 9 g01034444
Attach Tooling (A) and a suitable lifting device to apron (1) .
Illustration 10 g00821100
Install pin assembly (3) in order to connect apron (1) and link assembly (2). Remove Tooling (A) .
Illustration 11 g00821097
Remove the suitable blocks from the cutting edge.