PUMP GP-MAIN HYDRAULIC 4876229 - Caterpillar

Illustration 1 g02385036
Always inspect lifting eyebolts and all other lifting equipment for damage before performing any lifting. Never bend the eyebolts and the brackets. Never perform product lifting if components are damaged. Only load the eyebolts and the brackets under tension. Remember that the capacity of an eyebolt is less as the angle between the supporting members and the object becomes less than 90 degrees.
Ensure that the correct clothing is worn, refer to this Operation and Maintenance Manual, "General Hazard Information".The weight of the clean emission module (CEM) when laden is approximately 50 kg (110 lb). Two suitable double looped slings are required to lift the CEM. Also a suitable hoist will be required to remove and install the assembly.The slings must be attached to the CEM in the positions as shown in illustration 1.Ensure that the slings only contact the body of the CEM. A test lift may be required to achieve the correct balance of the assembly.Some applications may require a frame or jig to lift the CEM. A frame or jig must only be connected to the cradle of the CEM. Refer to the OEM for more information.