PUMP GP-GEAR 4933206 - Caterpillar

Engine Identification
Cat engines are identified with serial numbers, with performance specification numbers, and with arrangement numbers. In some of the cases, modification numbers are used. These numbers are shown on the Serial Number Plate and the Information Plate that are mounted on the engine.Cat dealers need these numbers in order to determine the components that were included with the engine. This information permits accurate identification of replacement part numbers.Engine Information Plate
Illustration 1 g00764335The engine information plate is located on the left side of the valve cover.Serial Number Plate
Illustration 2 g01035356The serial number plate is located on the left side of the cylinder block near the top deck at the rear of the block.European Union
Illustration 3 g01880193This plate is positioned on the bottom left side of the plate for the PIN.Note: The CE plate is on engines that are certified to the European Union requirements that were effective at that time.For engines compliant to 2006/42/EC, the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided below.
Engine Power Primary Engine (kW)____________________
Engine Power for Additional Engine (If Equipped) ____________________
Typical Engine Operating Weight for European Market (kg)____________________
Year of Construction____________________
Engine Type ____________________For the name and address of the manufacturer, and the country of origin of the engine, refer to the PIN plate.For manufacturer name and address and the country of origin, see the PIN plate.