PUMP GP-FUEL INJECTION 4P1384 - Caterpillar

Illustration 1 g03520724
Table 1
Specification for 282-6916 Differential and Bevel Gear Gp
Item Qty Part Specification Description
1 4 7X-0909 Bolt Torque to 105 20 N m (77 15 lb ft).
2 4 6V-9167 Bolt Torque to 530 70 N m (391 52 lb ft).
3 13 8T-4195 Bolt Torque to 60 12 N m (44 9 lb ft).
4 3 3S-1374 Spring Length under test force is 36.6 mm (1.44 inch).
Test force is 99.6 8.0 N (22.4 1.8 lb).
Free length after test is 46.7 mm (1.84 inch).
5 2 9F-1399 O-Ring Seal Lubricate the seal and the bore with the lubricant that is being sealed.
6 1 4K-6804 O-Ring Seal Lubricate the seal and the bore with the lubricant that is being sealed.
7 1 123-4003 Lip Type Seal Lightly lubricate the bore surface in the retainer with axle lubricant.
8 1 1P-4694 Bearing Cone Assembled backlash is 0.20 to 0.42 mm (0.008 to 0.017 inch).
9 2 6V-7727 Bolt Torque to 13 3 N m (115 27 lb in).
10 Total thickness of six new friction discs and six plates is 30.90 0.96 mm (1.217 0.038 inch):
6 366-7826 Friction Disc Thickness of one new friction disc is 3.25 0.08 mm (0.128 0.003 inch).
Thoroughly coat both sides of the friction discs with oil.
6 151-8274 Plate Thickness of one new plate is 1.90 0.08 mm (0.075 0.003 inch).
11 28 287-8326 Bolt Torque to 70 15 N m (52 11 lb ft) and then turn an additional 60 to 70 degrees.