4P7168 PUMP GP-AUXILIARY SEA WATER Caterpillar parts
3116
Rating:
Alternative (cross code) number:
CA4P7168
4P-7168
4P7168
CA4P7168
4P-7168
4P7168
Weight: 15 pounds 6 kg.
MARINE ENGINE,
Related part:
4P7168
PUMP GP-AUX -A
0R7878
R
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Water Pump Impeller Fit for Engine Pumps Parts 1W5664 7E0321 7E4115 4P-7168 170-6116 3208 3116 3126
YreEdZf Part numbers:: 1W5664 7E0321 7E4115 4P-7168 170-6116 3208 3116 3126 || Diameter:82.5mm / 3.25'' Width:73.4mm / 2.89'' Shaft Diameter:20mm / 0.79'' || Function: Maintains steady water flow for cooling || Installation: Pre-lubricated for easier assembly || Durability: Resists wear from sand and debris
YreEdZf Part numbers:: 1W5664 7E0321 7E4115 4P-7168 170-6116 3208 3116 3126 || Diameter:82.5mm / 3.25'' Width:73.4mm / 2.89'' Shaft Diameter:20mm / 0.79'' || Function: Maintains steady water flow for cooling || Installation: Pre-lubricated for easier assembly || Durability: Resists wear from sand and debris
Loczek Accessories Water Pump Impeller 1W5664 7E0321 for Caterpillar CAT 3208 3116 3126 Marine Engine Pumps 7E4115 4P-7168 170-6116 Parts
Loczek Brand new, high quality, corrosion resistant, reliable replacement parts || Made of high quality iron material, durable. || High quality and long life replacement parts accessories || Each product undergoes quality inspection before leaving the factory. || Stable performance and high reliability. || Durable and reliable: The exterior of the practical pump replacement impeller is made of high-quality rubber, which is sturdy and durable, not easy to break or deform, and can be used for a long time || Improved efficiency: This practical water transfer pump impeller is designed to be installed inside the water pump, replacing the impeller that cannot work again, extending the life of the water pump and improving work efficiency || Original level of quality and durability, the impeller is made of high-quality rubber and will not be damaged even if it is soaked in salt water for a long time. || Check your engine part number before purchasing. If you are unsure, please leave us a message. We'll help you find the right part number for your engine. || Designed for durability, providing higher flow rates and cooling flow to protect your engine
Loczek Brand new, high quality, corrosion resistant, reliable replacement parts || Made of high quality iron material, durable. || High quality and long life replacement parts accessories || Each product undergoes quality inspection before leaving the factory. || Stable performance and high reliability. || Durable and reliable: The exterior of the practical pump replacement impeller is made of high-quality rubber, which is sturdy and durable, not easy to break or deform, and can be used for a long time || Improved efficiency: This practical water transfer pump impeller is designed to be installed inside the water pump, replacing the impeller that cannot work again, extending the life of the water pump and improving work efficiency || Original level of quality and durability, the impeller is made of high-quality rubber and will not be damaged even if it is soaked in salt water for a long time. || Check your engine part number before purchasing. If you are unsure, please leave us a message. We'll help you find the right part number for your engine. || Designed for durability, providing higher flow rates and cooling flow to protect your engine
Water Pump Impeller Fit For 3208 3116 3126 7E4115 4P-7168 170-6116 1W5664 7E0321
Generic Compatible: Fits 3208, 3116, 3126 marine engines. || Installation: Direct replacement impeller. || : Flexible wear-resistant material. || Performance: Maintains steady water flow. || OEM: 7E4115, 4P-7168, 170-6116, 1W5664, 7E0321.
Generic Compatible: Fits 3208, 3116, 3126 marine engines. || Installation: Direct replacement impeller. || : Flexible wear-resistant material. || Performance: Maintains steady water flow. || OEM: 7E4115, 4P-7168, 170-6116, 1W5664, 7E0321.
Number on catalog scheme:
5
For full view, you need register
Compatible equipment models: 4P7168:
Information:
SEBE9865-00
13Oct2006
U-677
A-656
D-640
O-659
TM-512
After Failure Only
PRODUCT SUPPORT PROGRAM FOR REPLACING EXHAUST BELLOWS AND INSTALLING INNER HEAT SHIELDS ON CERTAIN 3500B MARINE PROPULSION AND MARINE AUXILIARY ENGINES
1059 PS51235
This Program can only be administered after a failure occurs.The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS51235" as the Part Numberand "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code.
The information supplied in this service letter may not be valid after the termination date of this program.Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
TERMINATION DATE
31Oct2008
PROBLEM
The failure of the exhaust bellows is caused by contact with the inner insulation of the hard shell heat shield, resulting in wear of the bellows convolute material until an exhaust leak path is formed.
AFFECTED PRODUCT
Model Identification Number
*******Group 1*******
3508B S2D00146-00161
3516 4MJ00030-00051, 150-177
5MJ00001-00032
3516B 2FW00117-00394
3CW00228-00257
3XS00404-00407
4BW00330-00588
8CN00134-00211
8KN00058-00587
9AN00169-00394, 397-402
B5G00100-00101
CBN00256-00400
PAG00100-00109
S2P00100-00107
S2R00100-00154, 158-163, 165-173, 176-195
S2S00100-00159, 161, 163-182, 184-201, 204-213
S2T00100
S2W00100-00104
S2X00100-00262, 264-298, 301-306, 309-324, 326-330, 335-340, 349-352, 362-365, 371-386, 388-391
S2Y00100-00108
3516B HD S2Z00100-00107
*******Group 2*******
3508B 1TW00233-00362
2BM00113-00187
3DM00081-00503, 506-512
3DW00144-00188
7SM00027-01014
S2A00100-00127
S2B00100-00167, 170-205, 211, 213-214, 217-226, 228-252, 254-264, 268
S2D00100-00143
S2E00100-00240, 242-325, 327, 329-341, 344-356, 358, 360-399, 401-432, 434-457
S2F00100-00117
*******Group 3*******
3512B 1PW00309-00446
2AF00194-00536
2EZ00215-00375
2GW00216-00431
4TN00035-00867
7HM00164-00270
8EM00246-00553
BRN00183-00195
FFG00001-00048
MKH00100-00103, 200-208
MRG00100-00102
S2G00101-00107
S2H00100-00164, 167-199, 202-207
S2J00100-00240, 244, 246-252, 254-261, 263, 267, 269-270, 272-275, 277-280, 284-285, 290-298, 301-302, 304
S2K00100-00194, 201-202, 205-210
S2L00100-00221, 224-256, 258-276, 280-310, 312-323, 326-342, 344-346, 348-360, 362-381, 385-431, 436-439, 441-447
S2M00100-00152
S2N00100-00118
PARTS NEEDED
Qty
Part Number Description
*******Group 1*******
64 1108314 WASHER
4 2071364 BELLOWS AS
8 2295333 SEAL
2 2860285 SHIELD
32 3E6916 NUT-FULL
32 7L6443 BOLT-HEX HEAD
*******Group 2*******
32 1108314 WASHER
2 2071364 BELLOWS AS
4 2295333 SEAL
2 2860284 SHIELD
16 3E6916 NUT-FULL
16 7L6443 BOLT-HEX HEAD
*******Group 3*******
48 1108314 WASHER
3 2071364 BELLOWS AS
6 2295333 SEAL
2 2843920 SHIELD
24 3E6916 NUT-FULL
24 7L6443 BOLT-HEX HEAD
ACTION REQUIRED
The fix for this issue consists of an internal shield that fits between the exhaust manifold and the hard shell heat shield, providing support for the insulation inside the hard shell heat shield.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 1*******
0-6000 hrs,
0-12 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
6001-12000 hrs,
13-24 mo 50.0% 50.0% 0.0% 0.0% 50.0% 50.0%
12001-18000 hrs,
25-36 mo 25.0% 25.0% 0.0% 0.0% 75.0% 75.0%
This is a 8.0-hour job for Group 1
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 2*******
0-6000 hrs,
0-12 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
6001-12000 hrs,
13-24 mo 50.0% 50.0% 0.0% 0.0% 50.0% 50.0%
12001-18000 hrs,
25-36 mo 25.0% 25.0% 0.0% 0.0% 75.0% 75.0%
This is a 6.0-hour job for Group 2
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 3*******
0-6000 hrs,
0-12 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
6001-12000 hrs,
13-24 mo 50.0% 50.0% 0.0% 0.0% 50.0% 50.0%
12001-18000 hrs,
25-36 mo 25.0% 25.0% 0.0% 0.0% 75.0% 75.0%
This is a 7.0-hour job for Group 3
PARTS DISPOSITION
All 207-1364 Bellow Assemblies that are replaced as part of the Rework Procedure must be returned to the address below in order for the warranty claim to be settled. Failure to return the 207-1364 Bellow Assemblies will result in rejection of that portion of the claim. All 207-1364 Bellow Assemblies must be properly packaged and labeled with the service letter program number.Caterpillar, Inc.ATTN: Tim EirichBldg B Claims Room3701 State Road 26 EastLafayette, IN 47905
Rework Procedure
Two inner shields are needed for each engine. One inner shield is used for each exhaust manifold. The new inner shields are used with the existing exhaust manifold shield.
Image1.1.1
For detailed information
13Oct2006
U-677
A-656
D-640
O-659
TM-512
After Failure Only
PRODUCT SUPPORT PROGRAM FOR REPLACING EXHAUST BELLOWS AND INSTALLING INNER HEAT SHIELDS ON CERTAIN 3500B MARINE PROPULSION AND MARINE AUXILIARY ENGINES
1059 PS51235
This Program can only be administered after a failure occurs.The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS51235" as the Part Numberand "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code.
The information supplied in this service letter may not be valid after the termination date of this program.Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
TERMINATION DATE
31Oct2008
PROBLEM
The failure of the exhaust bellows is caused by contact with the inner insulation of the hard shell heat shield, resulting in wear of the bellows convolute material until an exhaust leak path is formed.
AFFECTED PRODUCT
Model Identification Number
*******Group 1*******
3508B S2D00146-00161
3516 4MJ00030-00051, 150-177
5MJ00001-00032
3516B 2FW00117-00394
3CW00228-00257
3XS00404-00407
4BW00330-00588
8CN00134-00211
8KN00058-00587
9AN00169-00394, 397-402
B5G00100-00101
CBN00256-00400
PAG00100-00109
S2P00100-00107
S2R00100-00154, 158-163, 165-173, 176-195
S2S00100-00159, 161, 163-182, 184-201, 204-213
S2T00100
S2W00100-00104
S2X00100-00262, 264-298, 301-306, 309-324, 326-330, 335-340, 349-352, 362-365, 371-386, 388-391
S2Y00100-00108
3516B HD S2Z00100-00107
*******Group 2*******
3508B 1TW00233-00362
2BM00113-00187
3DM00081-00503, 506-512
3DW00144-00188
7SM00027-01014
S2A00100-00127
S2B00100-00167, 170-205, 211, 213-214, 217-226, 228-252, 254-264, 268
S2D00100-00143
S2E00100-00240, 242-325, 327, 329-341, 344-356, 358, 360-399, 401-432, 434-457
S2F00100-00117
*******Group 3*******
3512B 1PW00309-00446
2AF00194-00536
2EZ00215-00375
2GW00216-00431
4TN00035-00867
7HM00164-00270
8EM00246-00553
BRN00183-00195
FFG00001-00048
MKH00100-00103, 200-208
MRG00100-00102
S2G00101-00107
S2H00100-00164, 167-199, 202-207
S2J00100-00240, 244, 246-252, 254-261, 263, 267, 269-270, 272-275, 277-280, 284-285, 290-298, 301-302, 304
S2K00100-00194, 201-202, 205-210
S2L00100-00221, 224-256, 258-276, 280-310, 312-323, 326-342, 344-346, 348-360, 362-381, 385-431, 436-439, 441-447
S2M00100-00152
S2N00100-00118
PARTS NEEDED
Qty
Part Number Description
*******Group 1*******
64 1108314 WASHER
4 2071364 BELLOWS AS
8 2295333 SEAL
2 2860285 SHIELD
32 3E6916 NUT-FULL
32 7L6443 BOLT-HEX HEAD
*******Group 2*******
32 1108314 WASHER
2 2071364 BELLOWS AS
4 2295333 SEAL
2 2860284 SHIELD
16 3E6916 NUT-FULL
16 7L6443 BOLT-HEX HEAD
*******Group 3*******
48 1108314 WASHER
3 2071364 BELLOWS AS
6 2295333 SEAL
2 2843920 SHIELD
24 3E6916 NUT-FULL
24 7L6443 BOLT-HEX HEAD
ACTION REQUIRED
The fix for this issue consists of an internal shield that fits between the exhaust manifold and the hard shell heat shield, providing support for the insulation inside the hard shell heat shield.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 1*******
0-6000 hrs,
0-12 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
6001-12000 hrs,
13-24 mo 50.0% 50.0% 0.0% 0.0% 50.0% 50.0%
12001-18000 hrs,
25-36 mo 25.0% 25.0% 0.0% 0.0% 75.0% 75.0%
This is a 8.0-hour job for Group 1
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 2*******
0-6000 hrs,
0-12 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
6001-12000 hrs,
13-24 mo 50.0% 50.0% 0.0% 0.0% 50.0% 50.0%
12001-18000 hrs,
25-36 mo 25.0% 25.0% 0.0% 0.0% 75.0% 75.0%
This is a 6.0-hour job for Group 2
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 3*******
0-6000 hrs,
0-12 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
6001-12000 hrs,
13-24 mo 50.0% 50.0% 0.0% 0.0% 50.0% 50.0%
12001-18000 hrs,
25-36 mo 25.0% 25.0% 0.0% 0.0% 75.0% 75.0%
This is a 7.0-hour job for Group 3
PARTS DISPOSITION
All 207-1364 Bellow Assemblies that are replaced as part of the Rework Procedure must be returned to the address below in order for the warranty claim to be settled. Failure to return the 207-1364 Bellow Assemblies will result in rejection of that portion of the claim. All 207-1364 Bellow Assemblies must be properly packaged and labeled with the service letter program number.Caterpillar, Inc.ATTN: Tim EirichBldg B Claims Room3701 State Road 26 EastLafayette, IN 47905
Rework Procedure
Two inner shields are needed for each engine. One inner shield is used for each exhaust manifold. The new inner shields are used with the existing exhaust manifold shield.
Image1.1.1
For detailed information
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts pump Caterpillar catalog:
120H, 120H ES, 120H NA, 135H, 135H NA, 213B, 214B, 224B, 30/30, 3116, 3126, 320 L, 320B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 45, 55, 561M, 613C II, 928F, 92...
3114, 3116, 533, 543, 910E, 918F, 924F, 953B, AP-1000, AP-1000B, AP-1050, AP-1055B, BG-2455C, BG-245C, CB-434, CB-634C, CB-634D, CP-563, CS-531, CS-531C, CS-533, CS-533C, CS-563C, CS-573, CS-573C, CS-...
213B, 214B, 224B, 3116, 320 L, 322, 322 FM L, 322 LN, 325, 325 L, 325 LN, 613C II, 928F, 938F, 950F, 950F II, 953B, 960F, AP-1000, AP-1050, CB-634, CP-563, CS-531, CS-533, CS-533C, CS-573, CS-583, D25...
120H, 120H ES, 120H NA, 135H, 135H NA, 3116, 3126, 3126B, 3126E, 322C, 322C FM, 325C, 35, 45, 525B, 533, 535B, 539, 55, 550, 570, 570B, 574, 580, 580B, 613C II, 928G, 950G, 953C, 962G, AP-1000B, AP-10...
120H, 120H ES, 120H NA, 135H, 135H NA, 3116, 3126, 3126B, 3126E, 322C, 322C FM, 325C, 35, 45, 525B, 533, 535B, 539, 55, 550, 570, 570B, 574, 580, 580B, 613C II, 928G, 950G, 953C, 962G, AP-1000B, AP-10...
3114, 3116, 533, 543, 924F, AP-1000, AP-1000B, AP-1050, AP-1055B, BG-2455C, BG-245C, CB-634C, CB-634D, CP-563, CS-531C, CS-533C, CS-563C, CS-573C, CS-583C, IT12B, IT24F, TK370, TK371, TK380, TK381
3116, 3126
3116, 3126
140B, 1673C, 225, 225D, 227, 229, 231D, 3116, 3126, 3208, 3304, 3306, 518, 528, 571G, 572G, 613C, 627B, 637D, 639D, 814, 815, 816, 910, 920, 930, 931B, 931C, 931C II, 935B, 935C, 935C II, 950, 966C, 9...
120H, 120H ES, 120H NA, 135H, 135H NA, 30/30, 3116, 3126, 320 L, 320B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 L, 325B, 325B L, 45, 55, 561M, 613C II, 928F, 928G, 938F, 938G, 950F, 950F...
120G, 12G, 12H, 12H ES, 12H NA, 140H, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 163H, 163H NA, 16G, 16H, 16H NA, 214B, 235, 3114, 3116, 3126, 3126B, 3126E, 3176, 3176B, 3176C, 3196,...
9L8703
PUMP GP-FUEL INJECTION
1140, 1145, 1150
1140, 1145, 1150
2N6700
PUMP GP-PRELUBE
D399, G399
D399, G399
8W4025
PUMP GP-ELECTRIC DRIVE
120G, 12G, 130G, 140G, 160G
120G, 12G, 130G, 140G, 160G
1470181
PUMP GP-GEAR
928G, IT28G
928G, IT28G
2261267
PUMP GP-GEAR
AD45B, AD55, AD55B, AD60
AD45B, AD55, AD55B, AD60
3417652
PUMP GP-PISTON
D3K2 LGP, D4K2 XL
D3K2 LGP, D4K2 XL
4W5622
PUMP GP-GOV & FUEL INJ
3208, FB221, PR-1000
3208, FB221, PR-1000
1626284
PUMP & MTG GP-MAIN HYDRAULIC
345B II, 345B II MH, W345B II
345B II, 345B II MH, W345B II
1031771
PUMP GP-METERING
910E, IT14F
910E, IT14F