PUMP GP-GEAR 4T5533 - Caterpillar

Illustration 1 g06145830
Orientation view of the steering system
(1) Steering Wheel
(2) Metering Pump
(3) Steering and Hoist Pump
(4) Hydraulic Oil Tank
(5) Secondary Steering Pump
(6) Secondary Steering Pump Motor
(7) Combination Valve
(8) Pressure Switch
(9) Steering Cylinders
(10) Oscillating HitchThe machines are equipped with an electro-hydraulically controlled steering system. The following components make up the steering electro-hydraulic system:
Steering Wheel
Metering Pump
Steering and Hoist Pump
Hydraulic Oil Tank
Secondary Steering Pump
Secondary Steering Pump Motor
Combination Valve
Pressure Switch
Steering Cylinders
Oscillating HitchThe Transmission ECM controls the primary steering system. Using inputs from the operator and inputs from sensors, hydraulic oil is drawn from hydraulic oil tank (4), into steering and hoist pump (3). Pressurized oil is sent to combination valve (7) and out to metering pump (2). Rotation of steering wheel (1), shifts a spool within metering pump (2) and directs pressurized oil to one of two steering cylinders (10). Depending on the position of steering wheel (1), the machine will articulate left or right.When the signal from pressure sensor (8) indicates a loss of primary steering pressure, the transmission ECM automatically activates secondary steering pump motor (6) to drive secondary steering pump (5).