PUMP GP-FUEL INJECTION 4W2547 - Caterpillar

Illustration 1 g03520696
Table 1
Specification for 320-1111 Differential and Bevel Gear Gp
Item Qty Part Specification Description
1 4 6V-9167 Bolt Torque to 530 70 N m (391 52 lb ft).
2 4 7X-0909 Bolt Torque to 105 20 N m (77 15 lb ft).
3 1 293-4503 Lip Type Seal Lightly lubricate the bore surface in the retainer with axle lubricant.
4 1 8H-7803 Bearing Cup Before assembly, apply 2S-3230 Bearing Lubricant to the top of rollers.
5 1 2D-9572 O-Ring Seal Lubricate the seal and the bore with the lubricant that is being sealed.
6 30 287-8326 Bolt Torque to 70 15 N m (52 11 lb ft) and then turn an additional 60 to 70 degrees.
7 4 6V-7727 Bolt For field installation, apply blue Loctite 243 to the threads.
8 Total thickness of seven new friction discs and seven plates is 36.05 1.12 mm (1.419 0.044 inch):
7 366-7826 Friction Disc Thickness of one new friction disc is 3.25 0.08 mm (0.128 0.003 inch).
Thoroughly coat both sides of the friction discs with oil.
7 151-8274 Plate Thickness of one new plate is 1.90 0.08 mm (0.075 0.003 inch).
9 1 385-4749 Bevel Gear Set Assembled backlash is 0.20 to 0.42 mm (0.008 to 0.017 inch).
10 1 377-9319 D-Ring Seal Lubricate the seal and the bore with the lubricant that is being sealed.
11 1 377-9318 D-Ring Seal Lubricate the seal and the bore with the lubricant that is being sealed.
12 3 3S-1374 Spring Length under test force is 36.6 mm (1.44 inch).
Test force is 99.6 8.0 N (22.4 1.8 lb).
Free length after test is 46.7 mm (1.84 inch).
13 2 356-2456 O-Ring Seal Lubricate the seal and the bore with the lubricant that is being sealed.