PUMP GP-GEAR 5212411 - Caterpillar

(1) Distance between bottom face of nut and piston ... 1.904 in.(48.36 mm)(2) Distance between top face of nut and center of pin hole ... .156 in.(3.96 mm)(3) Diameter of the shaft ... 3.000 .0005 in.(76.2 0.013 mm) Bore in the bearing ... 3.0035 .0005 in.(76.289 0.013 mm)(4) Thickness of the thrust plate ... .306 .001 in.(7.77 0.03 mm) End play for the shaft ... .004 to .008 in.(0.10 to 0.20 mm)(5) 2P8760 Spring for the valve (later): Length under test force ... 1.50 in.(38.1 mm)Test force ... .730 .058 lb.(0.33 0.03 mm)Free length after test ... 1.665 in.(42.29 mm)Outside diameter ... .531 in.(13.49 mm)(5) 2S982 Spring for the valve (early): Length under test force ... 1.40 in.(35.56 mm)Test force ... .672 to .788 lbs.(0.30 to 0.37 kg)Free length after test ... 1.532 in.(38.91 mm)Outside diameter ... .531 in.(13.48 mm)(6) 4S9421 Spring for drive end: Length under test force ... 2.15 in.(54.61 mm)Test force ... 30.8 to 34.0 lbs.(13.95 to 15.40 kg)Free length after test ... 2.78 in.(70.61 mm)Outside diameter ... .940 in.(23.88 mm)