PUMP & MTG GP-GEAR 5278932 - Caterpillar

Because of the changes made to the shape of the base, some of the first new bases have been found to need a small modification if they are to be installed on a 3304 Engine that has a spacer plate cylinder block. One side of the base makes contact with a boss on the cylinder block, and approximately 2.03 mm (.080") must be ground off either the filter base or the boss on the cylinder block for clearance. The illustration shows the location on the filter base where clearance is needed. If any of these bases are in your parts stock, either: 1) Use the bases on 3306 Engines, 2) Grind the necessary clearance, or 3) Return the bases and order new 8N6212 Base Assemblies.
Location to grind clearance on filter base.