PUMP GP- 5337991 - Caterpillar

Install clip assembly (10) and clip (19) on the existing tubing with bolts (21) and washers (25). Position the clips 220 5 mm (8.7 0.2 inch) from the existing clips. Refer to dimension (F) in Illustration 3. Do not tighten the bolts.
Position tube assembly (6B) on the boom in clips (11) and (12). Position the tube 210 mm (8.3 inch) from the center of the pin bore. Refer to dimension (G) in Illustration 3. Install clamp (15) on the tube with bolt (23) and washer (20) .
Illustration 6 g02159900
Detail B (2) 173-7895 Clip (21)