PUMP GP- 5371195 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
B 2P-8260 Cylinder Liner Installer 1
C - P80 Rubber Lubricant -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Check the cylinder liner projection. Refer to Testing and Adjusting, "Cylinder Liner Projection - Inspect".
Illustration 1 g01111530
Install liner seals (3) on cylinder liner (1).Note: Do not use oil, grease, or Vaseline as a rubber lubricant on the lower liner seals.
Apply Tooling (C) on the cylinder block liner bore surfaces and liner seals (3).
Dip filler band (2) in clean engine oil for a moment. Install the filler band on the cylinder liner immediately.
Use Tooling (B) to install cylinder liner (1) in the cylinder block. Ensure that any marks in relation to the cylinder liner projection are in alignment.End By:
Install the pistons and connecting rods. Refer to Disassembly and Assembly, "Pistons and Connecting Rods - Install".