PUMP GP- 5371197 - Caterpillar

Illustration 7 g01057098Bulldozer Serial Number (4) ____________________The serial number plate (7) for the ripper is located on the side of the ripper frame.
Illustration 8 g01057104Ripper Serial Number (7) ____________________The serial number plate of the winch is located on the right side of the winch frame.
Illustration 9 g01334816
Illustration 10 g01323812Winch Serial Number ____________________Certifications
ROPS (5)
Message (5) is positioned on the vertical support of the outside right ROPS post.
Illustration 11 g01955348
Certification plate (ROPS)
Structural damage, an overturn, modification, alteration, or improper repair, can impair this structure's protective capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
This machine has been certified to the standards that are listed on the certification plate. The maximum mass of the machine, which includes the operator and the attachments without payload, should not exceed the mass on the certification plate.A typical example of the certification film is shown above.Refer to Operation and Maintenance Manual, "Guards (Operator Protection)" for more information.FOPS (6)
Illustration 12 g01077753
Certification plate (FOPS)
Message (6) is positioned on the outside left canopy.
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. This will void the certification. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
This machine has been certified to the standards that are listed on the certification plate.Sound Certification
Illustration 13 g00933634
A typical example of this film is shown. Your machine may have a different value.
If equipped, the certification film is used to verify the environmental sound certification of the machine. The value that is listed on the film indicates the guaranteed sound power level. The guaranteed sound power level is measured at the time of manufacture. The guaranteed sound power level is measured according to the conditions that are specified in "2000/14/EC".European Union
Note: The CE plate is on machines that are certified to the valid European Union requirements at that time. If the machine is equipped with the plate for the European Union, this plate will be attached to the PIN plate. The CE plate is positioned on the bottom left side of the plate for the PIN. For machines compliant to "2006/42/EC", the following information is stamped onto the CE plate. For quick reference, record this information in the spaces provided below.
Illustration 14 g01883459
Engine Power primary engine (kW)____________________
Engine Power for additional engine if equipped (kW)____________________
Typical machine operating weight for European market (kg)____________________
Year of construction____________________
Machine Type____________________For the name, the address and the country of origin for the manufacturer, see the PIN plate.For machines compliant to "1998/37/EC", the following information is stamped onto the CE plate. For quick reference, record this information in the spaces provided below.
Illustration 15 g01062968
Engine Power primary engine (kW)____________________
Typical machine operating weight for European market (kg)____________________
Year ____________________