PUMP GP- 5371212 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1U-9169     Valve Guide Driver     1    Start By:
Remove the inlet valves and exhaust valves. Refer to Disassembly and Assembly, "Inlet and Exhaust Valves - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01015291
Use Tooling (A) to remove the valve guides from the cylinder head assembly.Installation Procedure
Table 2
Required Tools    
Tool     Part Number     Part Description     Qty    
B     124-9057     Guide Collar     1    
9U-6895 Valve Guide Driver     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g02676390
Use Tooling (B) to install valve guides (1) . Install the valve guides until Length (X) is 20.0 0.5 mm (0.79 0.02 inch) above the cylinder head assembly.End By: Install the inlet valves and exhaust valves. Refer to Disassembly and Assembly, "Inlet and Exhaust Valves - Remove and Install".