6C5572 PUMP & MOTOR GP-REFUELING Caterpillar parts
307, 312, 315, 317, 320 L, 322, 322 LN, 325, 325 L, 325 LN, 330 FM L, 330 L, 350, D6M
Rating:
Alternative (cross code) number:
CA6C5572
6C-5572
6C5572
CA6C5572
6C-5572
6C5572
Weight: 9 pounds 4 kg.
EXCAVATOR, TRACK-TYPE TRACTOR,
Compatible equipment models: 6C5572:
Number on catalog scheme:
6
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2320 Combination Puller 1
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Drain the hydraulic oil tank into a suitable container. Refer to Operation and Maintenance Manual for the correct procedure.
Illustration 1 g01133274
Disconnect hose assemblies (2) from gear pump (1) .
Illustration 2 g01133283
Loosen bolts (3) and remove gear pump (1) .
Illustration 3 g02093955
Remove shim (4) .
Illustration 4 g02093958
Remove integral seal (5) .
Illustration 5 g02093960
Remove nut (6) .
Use Tooling (A) and remove gear (7) from gear pump (1) .
Illustration 6 g02093962
Remove O-ring seal (8) .
Remove bolts (10) and remove adapter (11) from gear pump (1) .
Remove lip seal (9) from adapter (11) .
Illustration 7 g02093963
Remove O-ring seal (12) from gear pump (1) .
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2320 Combination Puller 1
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Drain the hydraulic oil tank into a suitable container. Refer to Operation and Maintenance Manual for the correct procedure.
Illustration 1 g01133274
Disconnect hose assemblies (2) from gear pump (1) .
Illustration 2 g01133283
Loosen bolts (3) and remove gear pump (1) .
Illustration 3 g02093955
Remove shim (4) .
Illustration 4 g02093958
Remove integral seal (5) .
Illustration 5 g02093960
Remove nut (6) .
Use Tooling (A) and remove gear (7) from gear pump (1) .
Illustration 6 g02093962
Remove O-ring seal (8) .
Remove bolts (10) and remove adapter (11) from gear pump (1) .
Remove lip seal (9) from adapter (11) .
Illustration 7 g02093963
Remove O-ring seal (12) from gear pump (1) .
Caterpillar parts catalog:
Parts pump Caterpillar catalog:
3054, 3054B, 307, 416B, 416C, 416D, 424D, 428B, 428C, CB-434B, CB-434C, CB-544, CB-545, CP-433C, CS-323C, CS-431C, PS-150B, TH210, TH215, TH62, TH63, TH82
3054, 3054B, 312, 312B L, 312C, 315, 315B L, 317, 416B, 416C, 416D, 420D, 426C, 428B, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 554, 908, 914G, AP-800C, BG-225B, BG-225C, CB-434C, CB-534B, CB-53...
3054, 3054B, 307, 312, 312C, 315, 315B L, 317, 416B, 416C, 426C, 428B, 428C, 436C, 438C, 914G, AP-800C, BG-225B, CB-434B, CB-434C, CB-534B, CB-534C, CB-544, CB-545, CP-433C, CS-323C, CS-431C, IT14G, M...
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 12M, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 160K, 30/30, 3116, 3126, 3126B, 3126E, 320B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L,...
14G, 205B, 215B, 224B, 235, 245, 3114, 3116, 320 L, 330 L, 3304, 3304B, 3306, 3306B, 350, 3516, 375, 446, 528, 572G, 621, 910E, 920, 926, 936F, 943, 950B, 950F, 953, 953C, 966F, 980C, 980F, C-12, C12,...
120H, 120H ES, 120H NA, 135H, 135H NA, 3114, 3116, 320 L, 320B, 322B L, 322B LN, 325, 325 L, 325B, 325B L, 3508B, 3512, 3512B, 3516B, 5130, 5130B, 5230, 561M, 589, 631E, 633E II, 637E, 651E, 657E, 769...
120H, 120H NA, 135H, 135H NA, 3114, 3116, 320B, 320D GC, 320D L, 322B L, 322B LN, 322C, 322C FM, 323D L, 324D, 324D L, 324D LN, 325B L, 325C, 325D, 325D L, 326D L, 328D LCR, 329D, 329D L, 329D LN, 330...
120M, 120M 2, 12M, 140M, 140M 2, 14M, 160M, 160M 2, 16M, 215B, 215C, 215D, 219D, 225, 225D, 227, 229, 229D, 231D, 235B, 235C, 235D, 245, 245B, 245D, 311B, 311D LRR, 312, 312B L, 312C L, 312D, 312D L, ...
311, 311B, 312, 312B, 312B L, 315, 315B, 315B FM L, 315B L, 317, 317B LN, 318B, 320 L
315, 315B, 315C, 317B LN, 318B, D3C III, D3G, D4C III, D4G, D5C III, D5G
311, 320 L, 320B
311, 320 L
1221251
PUMP GP-GEAR
312, 315, 317
312, 315, 317
9T4713
PUMP GP-GEAR
215B, 215C, 215D, 219D
215B, 215C, 215D, 219D
120M, 120M 2, 12M, 140M, 140M 2, 14M, 160M, 160M 2, 16M, 215B, 215C, 215D, 219D, 225, 225D, 227, 229, 229D, 231D, 235B, 235C, 235D, 245, 245B, 245D, 311B, 311D LRR, 312, 312B L, 312C L, 312D, 312D L, ...
6H5579
PUMP ASSEM.
D353C
D353C
7C6436
PUMP AS-WATER
CB-434, CP-563
CB-434, CP-563
7N5445
PUMP ASSEM.
D398
D398
1754806
PUMP & MOTOR GP-FUEL TRANSFER
307, D6R, D6R II
307, D6R, D6R II
1272230
PUMP GP-FUEL INJECTION
M312, M315
M312, M315
M312, M315, M318, M320
311, 311B, 312, 312B, 312B L, 315, 315B, 315B FM L, 315B L, 317, 317B LN, 318B, 320 L
1478500
PUMP GP-AUXILIARY GEAR
312, 312B L, 315B L
312, 312B L, 315B L